
2box · Speedlight
2Box Speedlight Kit
2Box's complete kit around the DrumIt Three module: a 10-inch snare and three 8-inch toms with mesh heads and rubber edges, a 13-inch hi-hat on its own stand, a 12-inch crash and a 14-inch ride with bell, bow, edge and choke detection. It sets up in 1.2 by 0.7 metres.
A small kit with a large module behind it
The Speedlight’s proportions are those of a first or second electronic kit — a 10-inch snare, three 8-inch toms, three cymbals, a compact rack in 1.2 by 0.7 metres of floor. The module in front of it is not.
The DrumIt Three carries fifteen configurable trigger inputs, 4 GB of sound memory and 2Box’s open sample format, and it is the same module 2Box sells on its own to people upgrading much larger kits. Buying the Speedlight is one of the cheaper ways to get it.
That inversion is deliberate. 2Box’s stated position is that the sound source is the heart of an electronic kit and that a large pad count with a weak brain behind it is the worse trade. Whether you agree, it is a clear design argument rather than a spec sheet.
Mesh heads, rubber edges
Every drum on the kit has a mesh head with a rubber edge. The mesh gives under the stick and rebounds like a drumhead; the rubber edge is the rim, and it is a separate zone, so cross-sticks and rim work exist on the snare and on each tom.
That combination is worth naming precisely because photographs of electronic pads cannot distinguish it. A tensioned woven head and a coated rubber one look the same in a press shot and feel nothing alike.
The ride is a real ride
Fourteen inches, with bell, bow, edge and choke detection — four separate behaviours on one cymbal pad. On a kit of this size that is the single most generous specification, because a ride pattern with no bell is not a ride pattern, and a crash that cannot be choked ends when the sample ends rather than when the hand arrives.
The hi-hat is 13 inches on its own stand, so pedal travel is continuous. The crash is 12 inches with choke.
It grows sideways
The Universal Trigger Interface means the kit is not a closed system. Pads and cymbals from other makers plug into the spare inputs and are configured per input, so the Speedlight can be extended with whatever is affordable or already owned rather than only with 2Box parts.
For a player whose kit will change shape over several years, that matters more than the number of pads in the box today.
Specifications
| Attribute | Value |
|---|---|
| ekit | |
| Module | DrumIt Three — 44.1 kHz with 24-bit converters, 4 GB sound memory1 |
| Pad surface | Mesh heads with rubber edges on the snare and toms12Box states mesh head and rubber edge for the snare and each tom. It does not publish the surface of the cymbal pads. |
| Snare pad | 10 in with rim — mesh head, rubber edge1 |
| Tom pads | Three at 8 in with rim — mesh heads, rubber edges1 |
| Cymbals | 13 in hi-hat on its own stand, 12 in crash with choke, 14 in ride with bell, bow, edge and choke detection1 |
| Pad compatibility | Universal Trigger Interface — the kit can be augmented with other manufacturers' pads and cymbals1 |
| Trigger inputs | Fifteen universal inputs on the module, all fully configurable, with three-zone snare and cymbals supported1 |
| Sample import | Open Sound Architecture — the free Windows and Mac editor converts WAV files into multi-layer instruments and loads them over USB1 |
| Outputs | Four outputs, line in, headphones, MIDI in and out, USB1 |
| In the box | DrumIt Three module and holder, rack stand with all pad and cymbal holders, hi-hat stand, kick drum pad, and eight stereo 1/4 in cables with Velcro straps1 |
| Footprint | 1.2 m by 0.7 m, plus room for a throne1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec