Drum Atlas
Menu

2box · DrumIt

2Box DrumIt Three

  • Electronic kit
  • pro
  • current

A drum module built to be bought on its own and put behind somebody else's pads. Its Universal Trigger Interface takes fifteen inputs from the major pad makers' piezo and switch hardware, and its Open Sound Architecture loads user-converted WAV multisamples into 4 GB of memory.

Updated 2026-09-24Sources

A module that assumes it is not your only brand

Most drum modules are designed around their maker’s pads and merely tolerate other people’s. The DrumIt Three starts from the opposite assumption: 2Box calls the input stage a Universal Trigger Interface and states that it works with the major manufacturers’ pads, cymbals and hi-hats.

Every one of the fifteen inputs is configurable to the pad plugged into it. That is the difference between “compatible” as a marketing word and compatible as an engineering one — a piezo and a switch are simple devices, and what varies between makers is the sensitivity curve, the crosstalk and how a rim or a choke is wired.

The practical use case follows directly. A player who has a rack, a set of pads and a module that has run out of sounds can replace one box and keep everything else.

Open Sound Architecture

The other half of the design is what goes into the module rather than what comes out of it. 2Box supplies a free Kit and Sound Editor for Windows and Mac that converts WAV files into DrumIt’s own multi-layer format and loads them over USB into 4 GB of memory.

That is not sample playback in the one-shot sense. An instrument built in the editor can hold many velocity layers, so it responds to dynamics the way a factory sound does. A drummer can put their own snare — recorded properly, layered properly — onto the kit and have it behave.

Playing those sounds from the module rather than triggering a computer over MIDI removes the latency question entirely, which is the usual reason a live player abandons a laptop rig.

Fifteen inputs, and what they are for

Kick, snare with rim, four toms with rim, one hi-hat and three cymbals, with three-zone support on the snare and the cymbals. That is a larger kit than most modules at this price will address, and the zone support is on the two instruments where it earns the most.

Four outputs, line in, MIDI in and out. Loops can be assigned to any trigger input, as can kit up and down, which means a pad can become a footswitch or a song trigger.

Where it fits

Against the DrumIt Five MkII it is the smaller and cheaper of 2Box’s modules and the one aimed squarely at upgrades rather than at complete kits. Against GEWA’s G9, which is built on the same premise of driving other makers’ pads, it is the older idea and the one with the open sample format.

Specifications

Specifications
AttributeValue
ekit
ModuleDrumIt Three — 44.1 kHz sample rate with 24-bit converters, 4 GB sound memory1
Pad compatibilityUniversal Trigger Interface — inputs accept the majority of triggers built on piezo and switch technology, including the major pad makers' cymbals and hi-hats1
Trigger inputsFifteen universal inputs, configured as kick, snare with rim, four toms with rim, one hi-hat and three cymbals; three-zone snare and cymbals supported1
Sound engineMulti-layered samples with many velocity layers per instrument, from a library recorded in commercial studios1
Sample importOpen Sound Architecture — the free Windows and Mac editor converts WAV files into multi-layer instruments and loops and loads them over USB1
OutputsFour outputs, line in, MIDI in and out, USB for data transfer1
Performance featuresLoops assignable to any trigger input, WAV song playback and metronome, kit up and down assignable to any of the fifteen inputs1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    2Box DrumIt Three

    2BOX · accessed 2026-09-24