Drum Atlas
Menu

Alesis · Crimson

Alesis Crimson III

  • Electronic kit
  • intermediate
  • current

A nine-piece mesh-head kit on a four-post steel rack: a 12-inch dual-zone snare, two 8-inch rack toms, a 10-inch floor tom and an 8-inch kick, with a 12-inch hi-hat, two chokeable 12-inch crashes and a 14-inch triple-zone ride. Its module holds 80 kits and 470 sounds, many from the BFD library, and takes user WAV samples from an SD card.

Updated 2026-09-24Sources

Nine pieces at the middle of the range

The Crimson III is the configuration most drummers actually want before they can justify a flagship: a 12-inch snare with its own double-braced stand, three toms, a kick tower, and four cymbals including a triple-zone ride.

The 12-inch snare is the size worth paying attention to. Ten inches is the common entry-kit compromise, and the difference between the two is whether a ghost note near the edge and an accent in the middle land on different parts of the same drum. They do here.

The ride being triple zone — bow, edge and bell as separate sounds — is the other spec that separates this from a starter kit. A ride pattern that cannot find a bell is not a ride pattern.

The SD card is the interesting part

The module takes an SD card, loads user WAV files from it, and lets any of them be assigned to any zone of any pad. That is a sampler function on a mid-priced kit.

What it buys is escape from the factory library. A specific snare from a record, a sample a band already uses live, a sound the module simply does not have — any of them can be put on the rim of a tom or under the kick without a computer in the signal path. The same slot plays back WAV, MP3 and MIDI files to play along to, up to a 64 GB card.

Six faders and a segment display

The user interface was where the Crimson III changed most over the model before it: six mix faders for level control, and a backlit segment LCD.

Faders are an unglamorous specification that changes how often a drummer actually adjusts anything. Levels behind a menu get set once; levels on a fader get set during a song. On a kit whose sounds are drawn largely from the BFD library, being able to balance them by hand is most of the point.

Connecting it up

A 25-pin snake carries ten triggers to the module in one cable, which makes teardown and setup a single connection rather than eleven. Two spare 1/4-inch inputs — Tom 4 and Crash 2 — take an expansion pad each.

USB-B carries MIDI out to a computer for BFD Player or any other virtual instrument, and a stereo 1/4-inch pair plus headphones handles the audio.

Specifications

Specifications
AttributeValue
ekit
ModuleCrimson III — 80 kits (40 factory, 40 user), 470 sounds, six mix faders, backlit segment LCD1
Pad surfaceAlesis mesh drum heads1Alesis states mesh heads for the kit's drums. It does not publish the surface material of the hi-hat, crash or ride pads, so those are left unstated rather than read off a photograph.
Snare pad12 in dual zone, with the patented anti-hotspot trigger design (US 9,424,827 B2)1
Tom padsTwo 8 in rack toms and a 10 in floor tom, all dual zone1
Kick8 in tower pad1
Cymbals12 in hi-hat with control pedal, two 12 in crashes with choke, 14 in triple-zone ride1
Sample importUser WAV samples from SD card, assignable to any zone of any pad; cards up to 64 GB, FAT321
ConnectivityMIDI in and out, USB-B, SD card slot, 1/8 in auxiliary input, stereo 1/4 in TRS output, 1/4 in headphones1
Trigger inputsA 25-pin 10-trigger snake, plus two spare 1/4 in TRS inputs for Tom 4 and Crash 21
Practice featuresMetronome, real-time recorder, sequencer at 192 ticks per beat, 100 preset and 10 user songs1
RackFour-post steel with a separate double-braced snare stand1
Footprint125 cm wide by 79.86 cm deep by 115.8 cm high; 27.1 kg1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Alesis Crimson III

    Alesis Drums · accessed 2026-09-24