
Remo · Powerstroke 3
Remo Powerstroke P3 White Suede
The Remo Powerstroke P3 White Suede is one ply of 10-mil textured film with a 10-mil inlay ring, for either side of a bass drum. It gives focused, warm tones with overtone control and accentuated low end, on a matte white face that reads clean from the front without a smooth film's gloss.
Matte white, which is not the same as smooth white
A bass drum front head is the biggest thing an audience looks at, and there are three white options in this range that behave differently.
A Smooth White head is plain white film: glossy, and under a spotlight it reflects.
A coated head is clear film with white coating sprayed on: matte, but the coating is added mass.
A White Suede head is white film run through Remo’s texturing process: matte, non-reflective, with the texture worked into the surface rather than laid on top of it.
That last route gets you the matte look with less added mass than a coating, which is why Remo can describe this head as focused and warm without calling it damped.
What the ring is for
The 10-mil inlay ring bonded around the perimeter is the Powerstroke mechanism, and it is a targeted one. High, tight overtones live at the edge of a head; the fundamental lives at the centre. Damp the edge and the ring goes away while the note stays.
On a bass drum that is exactly the intervention wanted, because the uncontrolled part of a bass drum’s sound is nearly always edge ring rather than too much low end. Remo’s phrase for the result is overtone control with accentuated low end — accentuated by subtraction, not by addition.
Either side
Remo lists this for batter and resonant bass drum use both.
On the batter side the textured surface gives a felt beater a marginally softer contact, and the matte white shows wear where the beater lands, which makes it easy to judge when the head is finished.
On the front the matte white is the classic bass drum face — the surface most logos and heads printed with band names are applied to — and it stays readable under lights where gloss white blows out.
Where it fits
Bass drums 18 to 26 inch on kits that should look bright and sound controlled. Black Suede is the same construction in matte black; Smooth White is the glossier and slightly more open white alternative.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | 10 mil1 |
| Coating | Textured white1 |
| Position | Batter or resonant1 |
| Dampening | 10-mil inlay ring at the perimeter1 |
| Intended use | Bass drum1 |
| Surface | Suede — Remo's texturing process, producing a matte white non-reflective look1 |
| Character | Overtone control with accentuated low end and a soft feel1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec