
Remo · Powerstroke 3
Remo Powerstroke P3 Smooth White
The Remo Powerstroke P3 Smooth White is one ply of 10-mil white film with a 10-mil inlay ring, and Remo supplies a 2.5-inch impact patch with it. The ring controls the edge overtones while the uncoated film keeps the attack forward, giving focused mid and low tones with increased attack.
The patch in the box
Remo lists a 2.5-inch impact patch as part of this head, and that is not a small detail — it is a statement about where bass drum heads fail.
A beater strikes the same spot thousands of times a night. Everywhere else on the head is doing acoustic work; that one circle is taking mechanical punishment. Without reinforcement a bass batter will wear through at the beater contact long before the rest of the film is tired, and the head is finished because of a coin-sized area.
A patch bonded there roughly doubles the material at the point of impact. It also hardens the attack slightly, which on a head already chosen for attack is consistent with the design rather than a side effect.
Uncoated white, and what that keeps
A Smooth White head is white film with nothing applied. That distinction matters here because a coating would add mass exactly where this head is trying not to have any.
Remo’s description is focused mid and low tones with increased attack, and attack is what a coating costs you. So the head keeps the definition that a hard or plastic beater produces, while the inlay ring removes the edge ring that would otherwise blur it.
Uncoated film also has nothing to abrade off, which pairs well with the patch: the wear points are reinforced and the surface is not sacrificial.
What the inlay ring is doing
Ten mil of film bonded around the perimeter, damping the edge of the head where the high overtones live and leaving the centre free where the fundamental lives. Remo’s phrase for the result is perfect balance and tone control, and balance is the point — this is selective damping rather than a blanket.
Either side
Listed for batter and resonant use. As a front head it gives a plain glossy white face, brighter and more reflective under lights than the suede version, and a common base for a printed logo.
Where it fits
Bass drum batter 18 to 26 inch, for players who want the low end controlled and the attack intact — and who would rather the reinforcement arrived with the head than be bought separately. White Suede is the matte alternative in the same construction.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | 10 mil1 |
| Coating | Smooth white1Remo lists the finish as Smooth White — uncoated, untextured white film. |
| Position | Batter or resonant1 |
| Dampening | 10-mil inlay ring at the perimeter1 |
| Impact patch | 2.5 in impact patch included1 |
| Intended use | Bass drum1 |
| Character | Focused mid and low tones with increased attack1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec