
Remo · Powerstroke 3
Remo Powerstroke P3 Black Suede
The Remo Powerstroke P3 Black Suede is one ply of 10-mil textured film with a 10-mil inlay ring, built for either side of a bass drum. The ring controls overtones and accentuates the low end, and the suede texturing gives a soft feel and a matte black face that throws no light back.
Suede on a bass drum
Texturing a head is usually talked about in terms of brushes and stick feel, neither of which applies to a bass drum. So what is suede doing here?
Two things. The first is visual and it is why most people buy it: a matte black face that absorbs stage light instead of reflecting it, which on the largest flat surface on a kit is the difference between a drum that disappears and one that flares under a spotlight.
The second is acoustic and subtler. A textured surface adds a small amount of surface damping, and on a head that already carries a 10-mil inlay ring that reads as accentuated low end — Remo’s own phrase — because what the texturing takes away is at the top of the spectrum.
Ring plus texture
The inlay ring is a band of film bonded around the perimeter. It damps the edge of the head, where the high, tight overtones live, and leaves the centre free, where the fundamental lives. That is the Powerstroke design and it is why these heads sound fat rather than muffled.
Adding surface texturing on top of that pushes the whole result a little further in the same direction. Remo’s description — overtone control with accentuated low end and a soft feel — is a fair summary of two damping mechanisms working at the same end of the spectrum.
Either side of the drum
Remo lists this one for both batter and resonant bass drum applications, which is worth noting because the P3 Ebony is described specifically as a resonant head.
As a batter, the texturing gives a felt beater a slightly softer contact and a rounder impact than plain film would.
As a front head, it gives the audience-facing surface of the kit a uniform matte black. Ported or whole, the ring keeps working.
The one thing to know about matte black
It marks. Any textured matte surface shows where it has been touched, and a bass drum front head attracts fingerprints and case rub. Remo’s guidance for its suede heads is a light cleaner and a hand towel rather than scrubbing — the surface is textured film and it survives cleaning better than abrasion.
Where it fits
Bass drums 18 to 26 inch, either side, on kits built to look dark. The White Suede version is the same construction in matte white; the Ebony P3 is the smooth black alternative.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | 10 mil1 |
| Coating | Textured ebony1 |
| Position | Batter or resonant1 |
| Dampening | 10-mil inlay ring at the perimeter1 |
| Intended use | Bass drum1 |
| Surface | Suede — Remo's texturing process, producing a matte black non-reflective look1 |
| Character | Overtone control with accentuated low end and a soft feel1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec