
Remo · Powerstroke 3
Remo Powerstroke P3 Renaissance
The Remo Powerstroke P3 Renaissance is one ply of 10-mil specially treated film with a 10-mil inlay ring, built for bass drums. The Renaissance treatment gives a warm, dark tone with a soft feel and increased sensitivity, while the perimeter ring takes the edge overtones off and leaves the fundamental.
Treated film rather than a laminate
The warm bass drum heads in this range come at it two ways, and the distinction is in the construction.
Fiberskyn bonds a 3-mil fibre mat to the film. It is the closer of the two to calfskin, and the laminate adds mass.
Renaissance treats the surface of the film itself. Nothing is bonded on, so at 10 mil this head is 10 mil — and Remo lists increased sensitivity among its properties, which is not a phrase that appears on the Fiberskyn page.
On a bass drum, sensitivity means the head responds to a lighter beater stroke. For players who play the bass drum quietly and expressively rather than simply hitting it, that is the difference between the two heads.
The ring, at full weight
This one carries a 10-mil inlay ring — the standard P3 bass weight, not the lighter 2-mil ring the Fiberskyn version uses.
The ring damps the perimeter, where a head’s high, tight overtones live, and leaves the centre alone, where the fundamental lives. So the drum loses its ring and keeps its note, which is the whole Powerstroke argument and the reason these heads sound fat rather than dead.
Pairing a full-weight ring with a treated rather than laminated film is coherent: the treatment is doing less damping than a fibre mat would, so the ring can do more without the head going lifeless.
Warm and balanced
Remo’s description adds a well-balanced harmonic range to the usual warm and dark, and on a bass drum that is the useful claim. Over-damping a bass drum collapses it into a single dull thud with no identifiable pitch; the aim here is a drum that is dark but still has a note in it.
Either side of the drum
Listed for all bass drum applications. As a front head a Renaissance P3 gives a warm, slightly translucent tan face and shortens the drum’s sustain without a port; as a batter it gives a dark, woody impact under a felt beater.
Where it fits
Bass drums 18 to 26 inch that need to be warm and controlled and still expressive. Fiberskyn is the route to a more overtly skin-like surface; the Ebony P3 is the same ring on plain black film.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 11 |
| Film thickness | 10 mil1 |
| Coating | Textured — Renaissance surface treatment1 |
| Position | Batter or resonant1 |
| Dampening | 10-mil inlay ring at the perimeter1 |
| Intended use | Bass drum1 |
| Character | Warm, dark tone with a soft feel, increased sensitivity and a well-balanced harmonic range1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec