
Remo · Powerstroke P3 Felt Tone
Remo Powerstroke P3 Felt Tone Fiberskyn
The Remo Powerstroke P3 Felt Tone Fiberskyn builds the oldest bass drum muffling trick — a strip of felt laid against the head — into the head itself. A free-floating felt dampening strip runs across the film, so the traditional dampened bass sound arrives assembled rather than needing the drum to be taken apart to fit it.
Two period ideas on one head
This is the most deliberately old-fashioned bass drum head in the Remo range, and it gets there by combining two separate pieces of pre-modern practice.
Fiberskyn is film with a 3-mil polyspun fibre mat bonded to the playing face — the closest thing in current production to the calfskin that bass drums were built around.
Felt Tone is a free-floating felt dampening strip built into the head, reproducing the strip of felt that every one of those drums carried inside it.
Put together, you have a synthetic calf face damped by a line of felt, which is a fair reconstruction of what a bass drum was in 1955 — except that it holds its tuning through a humid room, which calfskin never did.
What it sounds like under a felt beater
Almost no click at all. A fibre face gives a beater a soft, woody contact rather than a hard one, and what comes out is a thump with the attack rolled off and the low end intact.
The felt strip then takes the ring off without flattening the note, because it damps one narrow band and leaves the rest of the head free. The result is short, dark, and pitched — recognisably a drum rather than a thud.
Why not just use a heavily damped modern head
Because the damping has a different shape. A modern pre-muffled bass head damps the whole perimeter, or carries an integral muffling system, and it produces a very controlled and very even result — which is exactly what most contemporary production wants.
A narrow felt strip leaves more of the drum’s own voice in the sound. Combined with the fibre face’s soft attack, what you get is characterful rather than neutral: uneven in a way that reads as old, and difficult to get to any other way.
Where it fits
Jazz, vintage-voiced and studio bass drums, 18 to 26 inch, where the drum has to sound like an old record rather than a modern kick. The coated and hazy Felt Tone heads are the brighter routes to the same dampening idea.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec