Drum Atlas
Menu

Remo · Powerstroke P3 Felt Tone

Remo Powerstroke P3 Felt Tone Coated

  • Drumhead
  • pro
  • current

The Remo Powerstroke P3 Felt Tone Coated builds the oldest bass drum muffling trick — a strip of felt laid against the head — into the head itself. A free-floating felt dampening strip runs across the film, so the traditional dampened bass sound arrives assembled rather than needing the drum to be taken apart to fit it.

Updated 2026-09-24Sources

The oldest bass drum trick, factory-fitted

Before muffling rings, gels and pre-damped heads, bass drums were tamed with a strip of felt laid across the inside of the head, held in place by the head’s own tension where it crossed the shell. Nearly every bass drum built before about 1970 had one, and a great many of the records people are still trying to sound like were made with one.

It works because a felt strip is a line contact rather than a surface. It damps a narrow band across the head and leaves the rest free, which shortens the note without killing the low end the way a pillow against the whole head does.

The catch has always been fitting it. A felt strip means loosening the head, threading felt across the shell, and tuning the drum back up — and adjusting it means doing all of that again.

What Remo has done about it

The strip here is built into the head as a free-floating element, so it arrives assembled and tensioned correctly. Remo’s description is straightforward: the traditional style of dampening a bass drum, in an easy-to-install all-inclusive drumhead.

Free-floating matters. A strip bonded to the film would damp a fixed amount at every tension; one that floats against the head keeps contact as the head moves, which is how a real felt strip behaves.

Coated, and what the pairing gives

The coated surface adds mass on the playing side, softening the beater transient into something woodier and rounder before the felt strip has done anything.

So two period-appropriate things stack: a warm, matte batter face and a line of felt behind it. For a drum that is meant to sound like it was recorded in 1968, this is a closer starting point than a modern pre-muffled head with a heavy inlay ring, because the damping is narrow and targeted rather than distributed around the whole perimeter.

Where it fits

Bass drums 18 to 26 inch, vintage and contemporary alike — Remo names both. The Hazy version is the brighter, uncoated alternative; the Fiberskyn version puts the same strip behind a skin-like face.

Specifications

Specifications
AttributeValue
Heads
CoatingCoated1
PositionBatter or resonant1
DampeningFree-floating felt dampening strip1
Intended useBass drum; vintage and contemporary drum-set applications1
TechnologyFelt Tone — traditional felt-strip dampening built into the drumhead1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Powerstroke P3 Felt Tone Coated

    Remo · accessed 2026-09-24