
Remo · Powerstroke 3
Remo Powerstroke P3 Clear Black Dot
The Remo Powerstroke P3 Clear Black Dot is one ply of 10-mil clear film with a 10-mil inlay ring and a black dot at the centre. Ring and dot damp different parts of the head, so the drum keeps its midrange and low-end resonance while gaining attack, projection and durability where the beater lands.
Two kinds of damping on one head
This head combines the two mechanisms the catalogue otherwise keeps apart, and they work on different parts of the drum.
The inlay ring is a 10-mil band bonded around the perimeter. High, tight overtones live at the edge of a head, so damping the edge removes the ring and leaves the fundamental at the centre intact. That is the Powerstroke design.
The dot is a disc at the centre, over the beater’s contact area. It stiffens the small region that does the most mechanical work, which hardens the attack and reinforces the part of the head that fails first.
Between them they leave a band of undamped film between the dot and the ring — and that band is where the drum’s note comes from.
Why the combination suits a bass drum
A bass drum batter has a harder life than any other head on the kit. One spot takes every stroke, and the beater is a hard object driven by a spring.
Ring alone gives a controlled, fat drum that eventually wears through at the beater. Dot alone gives a durable, punchy drum that still rings at the edge. Together you get Remo’s stated result: midrange and low-end resonant tones with increased attack, projection and durability.
Clear, with a black dot on top
Clear film keeps the beater transient bright, which pairs naturally with a head chosen partly for attack — the two decisions push the same way.
Remo’s description names it the Clear Top Black Dot, so the dot sits between the beater and the film. That is the more durable arrangement: the beater never touches the base film at all. Brush technique is irrelevant on a bass drum, so the usual objection to a top dot does not apply here.
The page credits the design’s inspiration to Steve Smith.
Where it fits
Bass drum batters 18 to 26 inch, for players who play hard and want the drum to stay punchy and stay alive. The coated version carries a bottom dot and a warmer face; the plain P3 Clear is the same head without the dot.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec