
Remo · Controlled Sound
Remo Controlled Sound Clear Black Dot
The Remo Controlled Sound Clear Black Dot is one ply of 10-mil clear film with a 5-mil black dot on top. The dot reinforces the impact area and stiffens it, giving focused midrange tones with a well-defined attack while the rest of the head stays free. Remo lists it from 4 to 26 inch.
Clear film, dot on top
Remo builds Controlled Sound two ways, and the difference is not cosmetic: the Clear version carries its dot on top, and the Coated version carries it underneath.
That makes this the harder, brighter, longer-lasting of the pair. The stick never touches the base film at all — it lands on the dot — so the head can take a great deal of centre-hitting before the film beneath it knows about it.
Underneath the dot it is an Ambassador: one ply of 10-mil clear film, nothing else added.
Why a dot works where a ring does not
A drumhead does not wear evenly. Sticks land in a small area near the middle, and that is where a head dents, stretches and fails, while the outer two thirds are barely touched.
A 5-mil disc bonded over that area roughly doubles the material exactly where the wear happens, and leaves the rest of the head at its original thickness. So the reinforcement is targeted, and the tone consequence is targeted too: Remo’s description is focused midrange tones with a well-defined attack, because a stiffened centre produces a harder, faster transient while the free outer area keeps the drum’s pitch and some of its ring.
Compare it with the other approaches in the catalogue and the difference is where:
- Dot — centre only. Attack and durability; the drum’s tone largely untouched.
- Edge ring (Pinstripe, Powerstroke) — perimeter only. Overtones gone, fundamental kept.
- Oil (Hydraulic) — everywhere.
Four inches to twenty-six
That size range is worth noticing, because it is the widest of any head in the Remo catalogue. Four and 7 inch are effects drums and octobans; the middle sizes are toms and snares; 20 to 26 inch are bass drums.
A dotted clear single ply on a bass drum batter is a perfectly sound choice — the beater punishes one spot, which is precisely the problem a dot solves.
The trade
Brushes, and only brushes. A brush cannot cross a raised disc, so brushed playing is not available on a top-dot head. If it matters, the Coated version puts the dot underneath and keeps the surface intact.
Where it fits
Loud snare and tom work, bass drum batters, and any drum where heads are dying at the centre. Remo’s Controlled Sound X is the same idea on heavier 12-mil film.
Specifications
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec