Drum Atlas
Menu

Remo · Powersonic

Remo Powersonic Clear

  • Drumhead
  • pro
  • current

The Remo Powersonic Clear is a bass drum head of two plies — 7 mil over 5 — with dampening rings placed specifically to control subsonic content. Two plies self-damp, and the placed rings target what a bass drum actually needs controlling, giving focused low-end with increased attack.

Updated 2026-09-24Sources

Placed rings, not a ring

The phrase on Remo’s page is worth reading carefully: specifically placed subsonic dampening rings. Plural, and placed.

Most damped bass drum heads carry one ring around the perimeter. That is a sound design and it deals with edge overtones. But a 22-inch membrane has more going on than an edge and a centre — it has a whole set of modes at different radii, and the low-frequency ones are where a bass drum’s boom and its uncontrolled sub content live.

Putting dampening in more than one place lets those be targeted individually, which is a different proposition from damping the rim and hoping.

Two plies underneath it

Seven mil over five, unevenly matched on purpose. The thicker ply takes the beater; the thinner one does the two-ply damping job without the mass a matched pair would add.

That gives the head self-damping before the rings do anything — the plies move slightly against each other and turn vibration into heat — and it gives the beater a stiffer surface to work against, which sharpens the transient.

Twelve mil total, in two layers, is a moderate weight for a bass batter. This is not a head that gets its control from sheer thickness.

Clear, and the attack

Remo’s description for this version is focused lows with increased attack, and clear film is why. There is no coating adding mass to the playing surface, so the beater transient comes through hard and defined — which is what a bass drum needs when it has to be heard through a loud band rather than felt.

That single word is the whole difference between the two heads. If the drum needs to read as a thud rather than a hit, the coated version is the one.

Where it fits

Bass drum batters 18 to 24 inch, where the low end must be focused and the sub content controlled without a pillow in the drum. Remo’s SMT range is the alternative approach — an integral pre-muffled construction rather than placed rings.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thickness7 + 5 mil1
CoatingClear1
PositionBatter1
DampeningSpecifically placed subsonic dampening rings1
Intended useBass drum1
CharacterFocused low-end with increased attack1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Powersonic Clear

    Remo · accessed 2026-09-24