Drum Atlas
Menu

Remo · Emperor SMT

Remo Emperor SMT Clear

  • Drumhead
  • pro
  • current

The Remo Emperor SMT Clear is a bass drum batter built from two clear plies — 7 mil over 5 — with Sub Muffl Technology, Remo's integral pre-muffled construction. The two plies control the highs and mids and add durability; the muffling leaves powerful lows and subsonic attack. Remo lists 16 to 24 inch.

Updated 2026-09-24Sources

Two plies, unevenly matched, pre-muffled

Seven mil over five, both clear, built into a bass drum head with Sub Muffl Technology — Remo’s integral pre-muffled design.

The uneven plies are the interesting part. A thicker outer ply takes the beater; a thinner inner ply does the two-ply damping job without adding the mass that a matched pair would. Twelve mil total, in two layers, which on a bass drum is a moderate weight with a two-ply’s self-damping already built in.

Then the Sub Muffl construction damps again. So this head arrives with two control mechanisms working, where the single-ply Ambassador SMT has one.

What that gets you over the Ambassador SMT

Attack and durability, mostly.

A beater striking a two-ply head produces a harder, more defined front edge than the same beater on a single ply, because the stiffer surface converts more of the stroke into a transient and less into membrane travel. On a bass drum that is the difference between a thud you feel and a thud you can hear through a loud band.

Durability follows from the same stiffness. A bass batter takes thousands of strokes in the same small spot, and two plies survive that better than one.

Remo’s shared description for the SMT range — controlled high and mid frequencies with powerful low tones, plus additional attack with subsonic low frequencies — is truest of this version, because the extra ply has already removed more of the mids before the muffling starts work.

Clear on a bass batter

Clear film keeps the beater transient bright. With a plastic or hard felt beater that can be a great deal of click, which is exactly what some music wants and some does not — a coated SMT is the same head with the click rounded off.

Because there is no coating to abrade, a clear batter also shows its wear as a dent or a stretch mark rather than as a bald patch, which is harder to read at a glance.

Where it fits

Bass drum batter, 16 to 24 inch, for players who want the muffling built in and the attack forward. The Ambassador SMT Clear is the single-ply for a more open drum with a broader tuning range; the Powersonic range is Remo’s other pre-damped two-ply bass approach.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thickness7 + 5 mil1
CoatingClear1
PositionBatter1
Intended useBass drum1
DampeningSub Muffl Technology — an integral pre-muffled design1
CharacterControlled high and mid frequencies with powerful low tones and subsonic attack1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Emperor SMT Clear

    Remo · accessed 2026-09-24