Drum Atlas
Menu

Remo · Emperor SMT

Remo Emperor SMT Ebony

  • Drumhead
  • pro
  • current

The Remo Emperor SMT Ebony is a bass drum head of two plies — 7.5-mil Ebony over 5-mil clear — with Sub Muffl Technology, Remo's integral pre-muffled construction. The black film adds no damping of its own, so the control comes entirely from the plies and the muffling, and Remo lists it for all applications.

Updated 2026-09-24Sources

Slightly heavier than its siblings

The clear and coated Emperor SMT heads are built from 7-mil and 5-mil plies. This one is 7.5-mil Ebony over 5-mil clear — a half mil more on the outer ply, which is the one that takes the beater.

That is a small difference and it points the same way as everything else about Ebony film: this is a head whose behaviour comes from its construction rather than from a surface treatment. Ebony is Remo’s opaque black stock, black all the way through, with no coating adding mass on top. So the damping here is two plies plus Sub Muffl Technology, Remo’s integral pre-muffled design, and nothing else.

All applications, not just jazz and contemporary

A small but real difference in Remo’s own wording: the clear and coated SMT pages describe a broad tuning range for jazz and contemporary applications, while the Ebony page says a broad tonal spectrum of tuning ranges for all applications.

That is a defensible distinction. An Ebony head has no coating to abrade and no clear window to scuff, and the extra half mil on the outer ply widens what it will take. It is the most generally applicable head of the three.

On the front of the drum

A bass drum’s resonant head is the one an audience looks at, and an Ebony SMT gives a plain matte black face with no logo and no gloss. Pre-muffled construction on a front head is less usual than on a batter, and it is useful: it brings the resonant head’s contribution to the ring down without a port having to be cut.

Left whole, the drum breathes and holds more of its low end. Ported, it goes considerably drier and becomes easier to mic — and black film hides a port far better than white or clear does.

Where it fits

Bass drum, batter or front, 16 to 24 inch, where the drum should read black and arrive already controlled. The clear and coated Emperor SMT heads are the same construction with the playing surface changed.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thickness7.5 + 5 mil1
CoatingEbony1
PositionBatter1
Intended useBass drum1
DampeningSub Muffl Technology — an integral pre-muffled design1
CharacterControlled high and mid frequencies with powerful low tones and subsonic attack1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Emperor SMT Ebony

    Remo · accessed 2026-09-24