
Remo · Emperor SMT
Remo Emperor SMT Coated
The Remo Emperor SMT Coated is a bass drum batter of two coated plies — 7 mil over 5 — with Sub Muffl Technology, Remo's integral pre-muffled design. Two plies plus the coating plus the muffling make this the most controlled head in the SMT range, while the construction still leaves powerful lows and subsonic attack.
Three things damping one head
Worth laying out, because this is the most thoroughly controlled bass drum batter Remo lists.
Two plies — 7 mil over 5 — sliding minutely against each other and turning vibration into heat.
A coating on the playing surface, adding mass that softens the beater transient and shortens the decay further.
Sub Muffl Technology, Remo’s integral pre-muffled construction, taking out the high and mid content that survives the first two.
Nothing has to be added inside the drum for this head to behave. That is the design intent, and it is why the SMT range exists.
What comes out
Remo’s description across the range is controlled high and mid frequencies with powerful low tones, and additional attack with subsonic low frequencies. On the coated two-ply that reads as a short, warm, low thud with a woody front edge rather than a click.
For a very large proportion of modern recorded and amplified drumming, that is the target sound, and getting there usually involves a coated batter, a muffling ring and a pillow. This head is an attempt to do it in one part.
Why coated rather than clear
Because most players tuning a bass drum are chasing a thud, not a click. The coating rounds the beater transient — audibly, before any EQ — and it makes the impact read as lower and warmer.
It also wears where the beater lands, which is genuinely useful: a coated bass batter tells you visibly when it is finished, while a clear one has to be judged by feel.
Tuning it
Two plies of 7 and 5 mil is enough film to take real tension, and the pre-muffled construction works across the range rather than at one setting, because the muffling is a free-floating internal design rather than a bonded ring.
Low and slack gives the modern kick sound. Brought up, the drum keeps more pitch and more attack — the tighter end of the range is where the two-ply advantage over the Ambassador SMT is most obvious.
Where it fits
Bass drum batter, 16 to 24 inch, when the drum needs to be controlled and warm out of the packet. The Ambassador SMT Coated is the single-ply version for a more open drum; the clear Emperor SMT keeps more attack.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec