Drum Atlas
Menu

Liberty Drums · Exotic

Liberty Drums Exotic Series

  • Drum kit
  • custom
  • current

The Exotic Series is Liberty's veneer-led kit, and the ply schedule differs by drum: toms are a single olive ply over six, at 5mm, while the snare and kick run olive over nine birch and two cherry at 8mm. Every veneer is 0.5mm, cut and hand-pressed at the UK factory.

Updated 2026-10-11Sources

Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.

Specifications

Specifications
AttributeValue
Shell
Shell materialOlivewood, birch and cherry veneers1
Plies7-ply toms — 1 olive over 6; 12-ply snare and kick — 1 olive, 9 birch, 2 cherry1
Shell thickness5 mm1Rack and floor toms. Snare and kick are 8mm.
Construction0.5mm veneers cut and hand-pressed in the UK factory; birch in the inner layers for strength and clarity1
Bearing edge
Bearing edgesLiberty Vintage (OPEX) — slightly rounded outer with a 45-degree inner1
Hardware
LugsLiberty chrome Beetle1
Hoops2.3mm chrome triple flange on all drums1
Build
Configurations3pc 13x9, 16x16, 22x18; 4pc adds a 14x5.5 snare; 5pc adds an 18x16 floor tom1
BadgeLiberty Iconic bronze1
Lead time12 weeks, made to order1
Origin
Made inUnited Kingdom1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Exotic Series — Olivewood Birch & Cherry

    Liberty Drums · accessed 2026-10-11