Drum Atlas
Menu

Truth Custom Drums

Truth Maple/Walnut/Acrylic Snare

  • Snare drum
  • custom
  • current

This Truth snare is a 14x6 hybrid shell: three rings of maple and walnut enclosing two rings of half-inch clear acrylic, with the acrylic slot-routed into the wood. Eight plies of maple sit outside seven of walnut. Ten air vents are cut through the acrylic behind the lugs, and the throw-off is a Trick GS-007 in brushed aluminium.

Updated 2026-09-24Sources

Wood, acrylic, wood, acrylic, wood

Read the shell from the outside in and it goes: maple-and-walnut ring, acrylic ring, maple-and-walnut ring, acrylic ring, maple-and-walnut ring.

Five horizontal bands stacked on top of each other, three of wood and two of half-inch clear plastic, each acrylic ring slot-routed into the wood above and below it so the join is a mechanical interlock rather than a glued butt.

This is a segment shell built in horizontal courses — the technique a stack-ply builder uses — with two of the courses made of something that is not wood at all.

Fifteen plies of timber go into the wooden rings: eight of maple on the outside, seven of walnut on the inside. Maple’s evenness on the outer face, walnut’s density and darkness against the head.

What the acrylic is doing

Acrylic is stiffer and heavier than wood and it does not absorb. A solid acrylic shell is famously loud, bright and long — and famously short of warmth.

Sandwiching two rings of it between wooden ones puts that behaviour into the middle of the shell rather than at its surfaces. The heads are still speaking into wood at the bearing edges, where the coupling happens, and the acrylic is adding stiffness and mass through the body.

The reviewer’s description is a thickly warm and dusky timbre with a disciplined, fat sound — fatter, wetter and snarier than the parts would suggest. That is the wood being heard at the edges and the acrylic being felt through the middle.

Ten holes in the plastic

There is one vent hole on most snare drums. This one has ten, cut through the acrylic and spaced behind each lug.

A vent lets the air displaced by the batter head escape, and how much venting a drum has changes how quickly it does. One small hole is a compromise most makers accept; ten is the drum being deliberately opened up.

The reviewer credits the vents with part of the timbre, and it is easy to hear why that would be. More venting means less air-spring resisting the head, a more open decay and a drum that keeps speaking rather than compressing when it is hit hard.

Putting them in the acrylic rather than the wood is the detail. They are visible all the way through, which is a builder making a functional decision look like a design one.

The Trick

The throw-off is a Trick GS-007 in brushed aluminium, and that choice is a whole argument in itself.

Trick’s throw-off is a machined aluminium mechanism with a multi-step tension adjustment and a positive lock, bought by builders and by players upgrading other makers’ drums. It is the fitting a shop specifies when it does not want the strainer to be the weak part of an expensive drum.

Underneath it, a 42-strand wire set, against the 20 strands of a standard snare. More wires means more contact with the head, more sizzle and a broader, wetter response — which matches everything else about this drum.

Specifications

Specifications
AttributeValue
Shell
Shell materialMaple and walnut with clear acrylic1*From MusicRadar's review of the drum. Truth publishes no catalogue or spec sheet of its own.
Shell constructionThree rings of maple/walnut enclosing two rings of half-inch clear acrylic, slot-routed into the wood; the acrylic rings have a single welded join each1*As described in the MusicRadar review.
Plies8-ply maple + 7-ply walnut1*MusicRadar gives eight plies of maple outside seven of walnut, with the plies butted rather than scarfed.
Air ventsTen, cut through the acrylic behind each lug1*From the MusicRadar review.
Hardware
HoopsDie-cast1*From the MusicRadar review.
LugsFull-length twin-mount tube lugs1*From the MusicRadar review.
Throw-offTrick GS-007, brushed aluminium1*From the MusicRadar review.
Heads
Batter headWhite coated with centre dot1*The head fitted to the review drum.
Snare side
Snare wires42-strand steel coil1*From the MusicRadar review.
Origin
Made inUnited States1*Truth builds in Oregon; the review identifies it as an American custom shop.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 3 · Secondaryeditorial

    Truth Custom Drums Maple/Walnut/Acrylic Snare review

    MusicRadar · accessed 2026-09-24