Truth Six-Ply Maple Kit
Truth's maple kit is built on thin six-ply North American maple shells measuring 5.5mm, reviewed in a three-piece of 22x20 bass drum, 12x7 mounted tom and 16x14 floor tom. The tom hangs on a chromed steel RIMS-style isolation bracket, and the Satin Candy Green finish is a thin stain that leaves the grain visible.
Five and a half millimetres
Six plies of maple at 5.5mm is thin, and it is the specification the whole kit turns on.
A standard professional maple shell runs seven or eight plies and something like 7 to 7.5mm. Taking two plies and nearly two millimetres out of that does two things: it drops the shell’s own resonant frequency, and it lets the shell move at lower input energy.
A thin shell speaks at a whisper. It also compresses sooner when hit hard, which is why thin shells are associated with jazz and studio work rather than with volume. The trade is not subtle and it is the right one for a kit being built to order for a particular player.
Six plies is also the count Gretsch and several of the vintage-facing American makers settled on, for the same reasons.
Twenty inches deep
The bass drum is 22 by 20, and that is a very deep drum for its diameter.
Depth adds air behind the head, which lowers the fundamental and lengthens the note, and it also adds distance between the two heads — so the front head responds a fraction later and the drum develops rather than arriving all at once.
A 22 by 20 is a long, low, developing bass drum rather than a punchy one. Paired with a 12 by 7 tom and a 16 by 14 floor tom, that is a kit designed around bigness rather than speed, on shells thin enough to stay musical at it.
The bracket
The mounted tom hangs on a chromed steel RIMS-style isolation bracket rather than being mounted through the shell.
An isolation mount grips the tension rods and holds the drum in a cradle, so nothing touches the shell but the heads. On a thin shell that matters more than on a thick one: a 5.5mm shell has so much of its behaviour in how freely the wood moves that bolting a bracket through it would take away a meaningful part of the drum.
The floor tom stands on legs, which is the other way of not touching the shell — and the reason floor toms have always sounded more open than rack toms did before isolation mounts existed.
Stain, not wrap
Satin Candy Green, thinly applied, with the grain showing through.
A wrap is a sheet of plastic glued round the shell: it hides the wood, adds mass and damping, and is a great deal easier to make look perfect. A thin stain under satin lacquer adds almost nothing to the shell and hides nothing about it.
On a thin six-ply shell that is the consistent choice — having taken mass out of the shell, you do not then glue mass back on to it. It also means the wood is on display, which is a custom builder accepting the harder standard.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | North American maple1*From MusicRadar's review of the kit. Truth publishes no catalogue or spec sheet of its own. |
| Plies | 61*From the MusicRadar review. |
| Shell thickness | 5.5 mm1*From the MusicRadar review. |
| Finish | Satin Candy Green — a thinly applied stain leaving the grain visible1*The finish on the review kit. |
| Hardware | |
| Tom mount | Chromed steel RIMS-style isolation bracket1*From the MusicRadar review. |
| Floor tom | On legs1*From the MusicRadar review. |
| Hardware | Generic components, as is common among American custom shops1*The reviewer's characterisation. |
| Origin | |
| Made in | United States1*Truth builds in Oregon; the review identifies it as an American custom shop. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Reported shortcomings
Collected from owner reports, forum threads and reviews. These are what players say about the Truth Six-Ply Maple Kit — not measurements we have taken, and not necessarily typical. A problem appearing here does not mean it will affect yours.
A few owners have mentioned that the innermost ply on the bass drum and floor tom met with small gaps that had been filled, though the interior surfaces were smoother than the exteriors1
Observed on one review kit. Truth builds to order, so a shell is a single piece of work rather than a production run.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 3 · Secondaryeditorial