Drum Atlas
Menu

Tama · S.L.P.

Tama S.L.P. G-Bubinga

  • Snare drum
  • pro
  • current

The Tama S.L.P. G-Bubinga is a 14 × 6-inch snare drum on a 12-ply, 10mm all-bubinga shell with a quilted bubinga outer ply, separate low-mass lugs, 2.3mm steel Mighty Hoops and the patented Linear-Drive strainer. At 10mm it is one of the thickest wood shells in production.

Updated 2026-09-24Sources

The G shells

Tama’s G-series S.L.P. drums are the thick ones: G-Maple at twelve plies and 11mm, G-Walnut at ten plies and 9mm, G-Bubinga at twelve plies and 10mm. In every case the idea is the same — a shell heavy enough that it returns almost all of the stroke to the head.

Bubinga is the densest of the three woods, so the G-Bubinga is the heaviest drum in the group by a clear margin even though it is a millimetre thinner than the G-Maple.

Low-mass lugs on a high-mass shell

The lugs are deliberately small and separate — one casting per tension rod rather than a double-ended lug spanning both heads. Less hardware bolted to the shell means less of the cylinder is damped by something that is not the shell itself.

On a 10mm bubinga drum that is a fine adjustment rather than a transformation, but it is the consistent Tama approach across the S.L.P. range and it does keep the drum from sounding dead.

The Linear-Drive strainer

The same ratcheted strainer fitted to the Starphonic drums, patented in the United States as 8017846. Its tension adjustment runs on fine gears rather than on friction, so a setting holds at high wire tension and can be returned to by counting clicks.

On a drum this loud, where the wires are usually run tight, that is a practical benefit rather than a specification-sheet one.

Specifications

Specifications
AttributeValue
Shell
Shell materialBubinga, with a quilted bubinga outer ply1
Plies121
Shell thickness10 mm1
Hardware
LugsSeparate low-mass lugs1
Hoops2.3mm steel Mighty Hoop, triple flanged1
Throw-offLinear-Drive strainer1
Strainer patentUS 80178461
Snare side
Snare wires20-strand Starclassic carbon steel1
model
ModelLGB1461

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    S.L.P. G-Bubinga LGB146

    Tama · accessed 2026-09-24