Drum Atlas
Menu

Sonor · Signature

Sonor Benny Greb Signature Brass

  • Snare drum
  • flagship
  • current

The Sonor Benny Greb Signature Brass is a 13 × 5.75-inch snare drum on a 1.2mm brass shell in an aged vintage brass finish with a laser-etched stripe. It carries vintage teardrop lugs with TuneSafe, the Dual Glide strainer and the same two interchangeable MonoRail dampeners as the beech model.

Updated 2026-09-24Sources

The same drum in metal

Sonor builds the Benny Greb signature in two shells at identical dimensions — 13 × 5.75 — with the same lugs, the same Dual Glide strainer and the same pair of MonoRail dampeners. Only the shell changes.

That makes the pair a clean comparison. The beech drum has a wood shell’s slower, rounder note and a warm low-mid centre; the 1.2mm brass shell is brighter, louder and rings considerably longer.

Why the dampeners matter more here

On the beech model the MonoRail pads are a tuning convenience. On thin brass they are close to essential, because a 1.2mm brass cylinder at 13 inches produces a great deal of sustain.

Having the damping built into the drum, adjustable and reversible, is a better answer than a gel pad stuck to the head — it sits at the hoop where it touches only the outer part of the head, so the centre stays open.

Aged rather than polished

The shell is finished in an aged brass rather than lacquered bright, and carries a laser-etched stripe around it. Both are cosmetic. A bare aged brass surface will keep changing with handling, which is the intention.

Specifications

Specifications
AttributeValue
Shell
Shell materialBrass1
Shell thickness1.2 mm1
Shell finishAged vintage brass with a laser-etched stripe1
Hardware
LugsVintage teardrop with TuneSafe1
Throw-offDual Glide1
DampeningTwo MonoRail dampeners, interchangeable1
Origin
Made inGermany1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Benny Greb Signature Snare

    Sonor · accessed 2026-09-24