
Premier · Elite
Premier Elite Snare
The Premier Elite snare is a 4-ply, 4.8mm shell of equal parts North American birch and maple, stiffened with one-inch beech support rings and built at 14 inches in 5.5, 6.5 and 8-inch depths. It has 2.3mm triple-flange hoops, Elite tension lugs, the 610 mechanism and 20-strand brass wires.
Four plies and a beech ring
4.8mm across four plies is a genuinely thin shell — thinner than almost anything else in current production at this level — and it only works because of the one-inch beech support rings at each end.
That is the pre-war construction, applied deliberately: a thin cylinder free to move through its middle, held round and true at the bearing edges by a harder wood. Premier’s own description of the rings is that they preserve roundness and stabilise the shell, which is exactly what they are for.
Birch and maple in equal measure
Not a core-and-face arrangement but a straight half-and-half. Birch brings the top-end lift and the fast decay; maple brings the even response across the spectrum.
On a shell this thin the species matter more than they would on a thick one, because the cylinder is contributing a great deal of the sound rather than merely reflecting it.
Brass wires
20 strands in brass rather than the usual steel. Brass is softer and denser, and a brass wire set reads as warmer and rounder than steel at the same count — less sizzle at the top, more body in the buzz itself.
Premier fits them across all three Elite snares, which on an already-warm thin shell is a consistent choice rather than an accident. Six finishes are offered across the three depths.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | North American birch and maple in equal measure1 |
| Plies | 41 |
| Shell thickness | 4.8 mm1 |
| Reinforcement rings | 1-inch beech support rings1 |
| Hardware | |
| Hoops | 2.3mm triple-flange steel1 |
| Lugs | Deep chrome Elite tension lugs1 |
| Throw-off | Heavy-duty 610 mechanism with quick release1 |
| Heads | |
| Batter head | Remo Coated UT1 |
| Snare side | |
| Snare wires | 20-strand brass, anti-rust1 |
| model | |
| Models | PEX1455S, PEX1465S, PEX1408S1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec