
Premier · Artist
Premier Artist Snare
The Premier Artist snare is a 7.5mm, 6-ply birch shell with a premium ash outer veneer, built in six sizes from 10 × 5.5 to 14 × 8 with 1.5mm triple-flange steel hoops. The wire count is matched to each size — 20, 24 or 42 strands — rather than being standard across the range.
Wires matched to the drum
The detail that separates this range from most is that the snare wire count changes with the size. The small drums get 20 strands, the standard 14-inch drums 24, and the two largest — the 13 × 7 and the 14 × 8 — get 42.
That is the right way round and it is rarely done. A deep drum has more resonant head area for the wires to cover and a lower pitch for them to respond to, so a heavier set keeps the buzz coherent; on a 10-inch drum the same set would smother it.
A thick birch shell with an ash face
7.5mm across six plies is a firm wall — considerably thicker than the 4.8mm Elite shell — and birch at that thickness is bright, fast and loud. Premier’s own summary of quick attack, strong projection and controlled sustain follows directly from the build.
The ash outer ply is a veneer for appearance rather than a structural layer.
Against the Elite
The two current Premier snare ranges are opposites. Elite is thin, re-ringed, half maple, with brass wires — warm, open and resonant. Artist is thick, unringed, all birch, with steel wires — bright, controlled and projecting.
Artist also covers far more sizes, which makes it the range to look at for a second snare rather than a main one.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Birch core with a premium ash outer veneer1 |
| Plies | 61 |
| Shell thickness | 7.5 mm1 |
| Hardware | |
| Hoops | 1.5mm triple-flange steel1 |
| Snare side | |
| Snare wires | 20-strand on the 10 and 12; 24-strand on the 14 × 5.5 and 14 × 6.5; 42-strand on the 13 × 7 and 14 × 81 |
| model | |
| Models | PAB1055S, PAB1206S, PAB1307S, PAB1455S, PAB1465S, PAB1408S1 |
| drum | |
| Character | Bright and punchy with quick attack, strong projection and controlled sustain1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec