
PDP · Concept
PDP Concept Black Wax
The PDP Concept Black Wax is a 10-ply European maple snare drum finished in a hand-applied wax-based sealer rather than lacquer or wrap, built in six sizes from 6 × 10 to 6.5 × 14. It carries dual-turret lugs, the DW MAG throw-off and fully-chromed wires with carbon steel coils.
Wax instead of lacquer
Nearly every wood snare leaves the factory sealed in lacquer or covered in a plastic wrap, and both add a thin, hard skin to the outside of the shell. A wax sealer does not. It soaks into the wood and leaves the surface effectively bare.
Whether that is audible on a 10-ply shell is debatable — the outer surface is a small part of a thick cylinder — but it is a real difference in construction rather than a marketing word, and the matt black surface it leaves is the drum’s whole visual identity.
Ten plies of European maple
European maple is a little denser than the North American maple used in most American-built drums, and ten plies makes for a firm shell. The drum lands on the controlled side of maple: clear attack, moderate sustain, not much spread.
Six sizes
This is the widest size range in the Concept line, and it covers two different jobs. The 5.5 and 6.5 × 14 are main snares; the 13 × 7, 12 × 6 and 10 × 6 are side snares with enough depth to be played properly rather than only tapped.
The 13 × 5.5 sits between the two — a 13-inch main snare for players who want a higher backbeat.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec