
PDP · Concept
PDP Concept 20-Ply Maple
The PDP Concept 20-Ply Maple is a snare drum on a twenty-ply maple shell hooped with thick maple-plied counterhoops rather than steel, built at 14 inches in 5.5 and 6.5-inch depths. It carries dual-turret lugs, True Pitch tension rods, the DW MAG throw-off and a natural satin finish.
Twenty plies
A standard maple snare shell runs six to ten plies. Twenty is roughly double the wall of a thick one, and the effect on the drum is dramatic: the cylinder becomes almost rigid, so nearly all the stroke is returned to the head.
The pitch rises, the sustain shortens, and the volume goes up. PDP’s own description — higher pitch, punchy attack, musical tone — is an accurate summary of what a wall that thick does.
Maple hoops as well
The counterhoops are themselves plied maple, which keeps every surface the head touches in the same material. There is no steel anywhere in the tuning path except the tension rods.
That makes the rimshot considerably softer and lower than a steel-hooped maple drum produces, and it is the reason this drum does not simply read as loud. The shell provides the pitch and the projection; the hoops take the glare off.
Against the maple/walnut version
PDP builds a 20-ply limited drum with sixteen maple plies cored between walnut. That one is darker and throatier. This all-maple version is the brighter and more even of the two, and the easier one to tune across a wide range.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec