
Mapex · Black Panther
Mapex Black Panther Atomizer
The Mapex Black Panther Atomizer is a 14 × 6.5-inch snare drum on a 2mm seamed aluminium shell with a rolled and moulded SONIClear 45-degree edge, in-line locking lugs and Sonic Saver hoops. At 2mm the shell is twice the thickness of the classic aluminium snares, which trades ring for focus.
Two millimetres of aluminium
The aluminium snares most players know — the Supraphonic, the Acrolite — are spun from sheet a little over a millimetre thick. The Atomizer’s shell is 2mm, which for a metal of aluminium’s density is a substantial change.
More mass in the wall means less of it moves. The drum keeps aluminium’s characteristic dry, bright attack but produces markedly less of the long metallic ring that thinner shells give, and its fundamental sits lower.
Rolled and moulded edges
Rather than machining a 45-degree edge into the metal, Mapex rolls and moulds the SONIClear profile into the shell itself. A formed edge is stiffer than a cut one and does not leave a thin feather of metal at the apex, which is what tends to dent on a cut aluminium edge.
In use
6.5 inches and 2mm together make this a loud drum with a short decay — closer in behaviour to a thick brass snare than to a classic aluminium one. It takes rimshots hard and sits well under a close microphone without much damping.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Seamed aluminium1 |
| Shell thickness | 2.0 mm1 |
| Bearing edge | |
| Bearing edge | Rolled and moulded SONIClear 45°1 |
| Snare bed | 2.3 mm1 |
| Hardware | |
| Lugs | In-line locking B-lugs, 3 air vents1 |
| Hoops | Sonic Saver1 |
| Throw-off | Cylinder-drive strainer with micro-lock tension adjustment1 |
| model | |
| Model | BPNAL4651CN1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec