
Lignum Drums · Steam Bent
Lignum Steam Bent Snare
Lignum's steam bent snare is a single-ply shell bent round with steam rather than cut into staves. The point of the change is thickness: bending lets the shell go far thinner than a stave shell can be worked to. Built in 14 inches at 5, 5.5 and 6.5 deep, in a long list of woods, with generic hardware or Lignum's own in chrome or solid brass.
Why bend a shell that could be staved
Lignum built stave shells for more than twenty years before adding steam bending, and the reason given for the change is specific rather than romantic: a bent shell can be made much thinner than a staved one.
A stave shell starts as a ring of blocks glued edge to edge and is then turned down inside and out. How thin it can go is limited by what the glue joints will tolerate and by how much material has to be left for the turning to stay true. A steam-bent shell starts as a single board already close to its final thickness, so there is no joint running the height of the shell to work around.
Thinner shell, less mass to move, more of the head’s energy left in the drum. That is the whole argument.
The woods
The gallery runs much wider than the usual maple and birch: walnut and white walnut, black cherry, ash, tiger oak, beech, fiddleback sycamore maple, ice birch, quilted mahogany, purpleheart, makoré, lacewood and taxus. Sizes shown are 14 inch, at 5, 5½ and 6½ deep.
Hardware
Two routes. Standard generic fittings, or hardware Lignum makes itself, in chrome or pure brass — on the brass drums, down to the lugs and hoops.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Construction | Single-ply steam bent1Lignum states these shells are thinner than the stave shells it has built since 1999, which is the stated reason for bending them. No figure in millimetres is published. |
| Shell woods | Walnut, cherry, ash, oak, beech, birch, sycamore maple, mahogany, purpleheart, makoré, lacewood and yew, among others1 |
| Hardware | |
| Hardware | Generic, or Lignum's own made in-house1 |
| Hardware finish | Chrome or pure brass1 |
| Origin | |
| Made in | Belgium2 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec