Drum Atlas
Menu

Lignum Drums · True Solid

Lignum True Solid Snare

  • Snare drum
  • custom
  • current

The Lignum True Solid is a snare drum whose shell is one log — no glue and no joints anywhere in it. Lignum cuts the timber itself, and the average journey from wet log to finished drum is a year and a half to two years, so only a handful are built each year. Shells are 13 or 14 inches, in birch, maple, ash or cherry.

Updated 2026-10-08Sources

One log, and nothing else

Most “solid” snare drums are not one piece of wood. A stave shell is strips glued edge to edge; a steam-bent shell is one board persuaded into a circle and joined at a scarf. A true solid shell is neither: a log is bored out and turned down until what is left is a cylinder, with the grain running continuously the whole way round.

It is the oldest way to make a drum and the least forgiving. The wood has to dry without checking, and a log thick enough to yield a 14-inch shell is thick enough to take years to give up its moisture. Lignum puts the average at a year and a half to two years from wet log to finished drum, which is most of the reason only a handful exist in any given year.

Why the timber matters more here

On a ply shell the species is a tone colour layered over a construction that does most of the work. On a true solid shell there is no construction to speak of — the wood is the drum, and a flaw in the log is a flaw in the instrument.

That is why Lignum cuts its own. Maple, ash and birch come from Belgian timber; cherry, which it describes as very rare to find at this size, is cut in France.

Fittings

The drum carries Lignum’s own beertap strainer, hardware in chrome or brass, Remo heads, and a set of uncoated carbon-steel wires engraved with the company’s name.

Specifications

Specifications
AttributeValue
Shell
ConstructionTrue solid — one log, no glue and no joints1
Shell woodsBirch, maple, ash or cherry1
Timber originMaple, ash and birch cut locally in Belgium; cherry logs cut in France1
DepthsNot stated*Lignum lists the diameters and the woods but does not publish a depth range for the true solid shells.
Hardware
StrainerLignum beertap1
Hardware finishChrome or brass1
Heads
HeadsRemo1
Snare side
Snare wiresUncoated carbon steel, engraved Lignum Drums1
Build
Wet log to finished drumAround 1.5 to 2 years1
Built per yearA handful1
Origin
Made inBelgium2
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    True solid snares

    Lignum Drums · accessed 2026-10-08

  2. 2Tier 1 · Primarymanufacturer spec

    About Lignum Drums

    Lignum Drums · accessed 2026-10-08