Drum Atlas
Menu

Kumu Drums · All Birch Custom

Kumu All Birch Custom Snare

  • Snare drum
  • custom
  • current

The same two shells as the Kumu kit, as a snare: the thin 4-ply 3.8mm Original with 3.8mm SoulRings, or the 66S built from six 1mm veneers laid four vertical to two horizontal. Diameters run 10 to 15 in, 14 being the common one, with depth chosen to a quarter inch.

Updated 2026-10-11Sources

Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.

Specifications

Specifications
AttributeValue
Shell
Shell material100% Finnish birch1
PliesOriginal — 4-ply; 66S — 6-ply, four vertical veneers to two horizontal1
Shell thickness3.8 mm1The Original shell, with 3.8mm inner SoulRings. The 66S is six 1mm veneers.
Bearing edge
Bearing edgesStandard 45-degree inner with slight outer rounding; 30-degree or full-round to order1
Hardware
Hoops2.3mm steel Powerhoop, ClassicWoodHoop with claw hooks, or through-bolted SuperWoodHoop1
LugsChrome-plated solid steel straight D-lug, optionally with a coloured wood insert1
StrainerNot stated on the maker's page1
Build
Diameters available10, 12, 13, 14 and 15 in; depth to a quarter inch1
Origin
Made inFinland — Turenki2

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    All Birch Custom snare drums

    Kumu Drums · accessed 2026-10-11

  2. 2Tier 1 · Primarymanufacturer spec

    All Birch Custom drum sets

    Kumu Drums · accessed 2026-10-11