Drum Atlas
Menu

Kumu Drums · All Birch Custom

Kumu All Birch Custom

  • Drum kit
  • custom
  • current

Kumu builds to order in Turenki from certified Finnish birch, and offers two shells: the thin Original — 4-ply 3.8mm toms with 1.8mm inner SoulRings, 5-ply 5mm bass drums — or the 66S, six 1mm veneers laid four vertical to two horizontal. Depths are chosen in quarter-inch steps.

Updated 2026-10-11Sources

Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.

Specifications

Specifications
AttributeValue
Shell
Shell material100% Finnish birch, PEFC/FSC certified1
PliesOriginal — 4-ply toms, 5-ply bass drums; 66S — 6-ply, four vertical veneers to two horizontal1
Shell thickness3.8 mm1Original toms. Original bass drums are 5mm; the 66S is six 1mm veneers.
Reinforcement1.8mm inner SoulRing strips on the Original shell1
Bearing edge
Bearing edgesHand-finished and oiled with paraffin; standard 45-degree inner with slight outer rounding, with 30-degree and full-round options1
Hardware
LugsChromed solid steel straight D-lug, small footprint, optionally faced with wood veneer1
Hoops2.3mm steel Powerhoop, ClassicWoodHoop or SuperWoodHoop on toms; bass drum hoops always ten-veneer birch1
Tom mountingKumurim plate, colour-matched to the drum, fitting all L-rod holders1
Build
Diameters availableToms 6 to 18 in; bass drums 14 to 28 in; depths in quarter-inch increments1
Bass drum optionSideHole mic port, which leaves the front head intact1
Origin
Made inFinland — Turenki1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    All Birch Custom drum sets

    Kumu Drums · accessed 2026-10-11