Gretsch · Full Range
Gretsch Full Range Hammered Brass
The Gretsch Full Range Hammered Brass is a 1.2mm hammered brass snare drum built at 14 inches in 5 and 6.5-inch depths, cut with 30-degree bearing edges and fitted with die-cast hoops. The 30-degree edge is a Gretsch signature and is unusual on a metal shell.
A 30-degree edge on metal
Gretsch has cut 30-degree bearing edges on its wood drums since the round-badge era, and the rounded, shallow profile is a large part of why a Gretsch shell sounds warm where other American maple drums sound bright.
Carrying that angle onto a brass shell is unusual. Almost every metal snare is cut at 45 degrees, which gives a small, hard contact patch and a sharp attack. Thirty degrees puts more shell under the head, which broadens the contact, drops the fundamental and takes the glassy edge off.
Hammering and die-casting together
The shell is hammered, which breaks up the even ring a smooth brass cylinder produces. The hoops are die-cast, which clamps the head edge hard and shortens the decay further.
Three separate decisions — shallow edge, hammered surface, cast hoops — all push the same way. This is brass with almost everything done to it that can be done to stop it ringing, and the result is a loud, dry, dark metal drum rather than a bright one.
Sizes
5 and 6.5 inches. The 5 is the quicker and more articulate; the 6.5 is where the combination of mass, depth and cast hoops produces a genuinely large sound with very little tail on it.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec