Gretsch · Full Range
Gretsch Full Range Hammered Black Steel
The Gretsch Full Range Hammered Black Steel is a 1.2mm hammered steel snare drum in a black finish, built at 14 inches in 5, 6.5 and 8-inch depths with 45-degree bearing edges and die-cast hoops. It is the loudest and most cutting shell in the Full Range.
Steel where the brass gets 30 degrees
The hammered brass drum in this range is cut at 30 degrees; the hammered steel is cut at 45. That is the tell that these two are not the same design in different metals.
Steel is stiffer than brass and already produces a hard, fast attack. Giving it the shallow Gretsch edge as well would move it a long way from what a steel snare is for. At 45 degrees the contact patch stays small and the drum keeps its cut.
Hammering as the only softener
With a 45-degree edge and die-cast hoops, the hammered surface is the one thing working against the drum’s brightness — and it is working on the sustain rather than on the attack.
What results is a very loud drum with an immediate front end and a short tail: a lot of crack, not much ring. The black finish is cosmetic, but it suits an instrument that is unambiguously a rock snare.
Three depths
Alone in the metal Full Range drums, this shell is offered at 8 × 14. Steel at that depth is an enormous sound and needs a room to make sense in. The 5 is the most controllable, and the 6.5 is the compromise most players will actually use.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec