Drum Atlas
Menu

Baltimore Drum Company

Baltimore Drum Solid Shell Snare

  • Snare drum
  • custom
  • current

The Solid Shell is Baltimore Drum Company's one-piece snare, made to order in Maryland with the company's proprietary bearing edge and snare bed and its machined aluminium hardware. Documented examples include a 6x14 in osage orange and a 5-inch solid shell; the company also builds ply snares, among them a 10-ply maple 6.5x13.

Updated 2026-09-24Sources

One piece of wood

A solid shell is turned or steam-bent from a single piece of timber rather than laminated from plies. There is no glue line running round the drum and no cross-grain anywhere in the wall.

What that buys is a shell that vibrates as one body. Ply shells are stiffened by their cross-laminations, which is why they can be thin; a solid shell gets its strength from the wood itself, and it moves more freely at low amplitude. Players describe solid drums as opening up under a light stroke in a way a ply drum has to be hit to do.

It is also the hardest shell to make. Wood moves as it dries and keeps moving afterwards, and a one-piece shell has nothing holding it round. Most makers who try it lose some.

Osage orange

The documented example is osage orange, and it is an unusual choice worth stopping on.

Osage is a North American hedge tree, historically planted in field rows and cut for fence posts because it resists rot almost indefinitely. It is among the densest and hardest native American timbers — harder than hickory, harder than white oak — and it is bright yellow when freshly cut, darkening to a deep amber with light.

As a drum shell, that density means a high fundamental, a lot of attack and a short decay. It is the opposite of a soft, warm drum, and on a 6 by 14 it is a loud, cutting instrument.

That a small shop is turning solid shells out of a fence-post wood is the kind of choice you find at this end of the trade and almost nowhere else.

Edges and beds first

As with the kits, the company’s own description leads with the bearing edge and the snare bed rather than the shell — the two cuts Keith Larsen spent six years developing before the first drum shipped in 1992.

On a snare drum those two cuts do more to set the sound than anything else on the bench. The edge decides how much of the head’s energy the shell takes; the bed decides how the wires sit against the resonant head, and therefore how much of a ghost note actually speaks.

The hardware is machined aluminium, redesigned with additional machined components when Larsen restarted the company in 2009.

Sizes, and what else the shop makes

Solid shells are documented at 6 by 14 and at 5 inches deep. The shop also builds ply snares — a 10-ply maple 6.5 by 13 is one of the drums its owners write about, described as the most versatile thing in their collection.

Thirteen-inch snares are a minority size and a deliberate one: smaller diameter at the same depth raises pitch and tightens response without losing body, which is why they turn up in the hands of players doing a lot of ghost-note work.

Every drum is made to order. The company’s instruction is to call and ask, and the 2009 Snare Drum Olympics win in Nashville came within months of it reopening.

Specifications

Specifications
AttributeValue
Shell
Shell constructionSolid shell1*Baltimore Drum's own site names solid-shell snares in owners' accounts rather than in a catalogue entry; the company publishes no spec sheet.
Shell materialOsage orange on the documented 6 × 141*Named on Baltimore Drum's own site in an owner's account of his drum.
Bearing edgeProprietary to Baltimore Drum1
Bearing edge
Snare bedProprietary to Baltimore Drum1
Hardware
HardwareMachined aluminium, redesigned when the company restarted in 20091
Build
Documented sizes6 × 14 solid osage orange; a 5 in solid shell; a 10-ply maple 6.5 × 131*All three come from owners' accounts on the company's own site rather than a size list.
Origin
Made inUnited States1
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    About Baltimore Drum Company

    Baltimore Drum Company · accessed 2026-09-24