
Baltimore Drum Company · Premium Series
Baltimore Drum Premium Series
The Premium Series is Baltimore Drum Company's made-to-order kit, built in Maryland to Keith Larsen's design: proprietary bearing edges and snare beds, and machined aluminium hardware including the company's MAC lugs. Kits are specified per order; a documented set runs 8x10, 9x12, 11x14 and 16x22 in Dark Forest Blue.
Six years before the first drum shipped
Keith Larsen founded Baltimore Drum Company in 1986 and spent six years in research and development before taking the drums to the 1992 PASIC convention.
What those six years produced is the list the company still leads with: proprietary bearing edges, proprietary snare beds, machined aluminium hardware, and the finishes. Four things, all of them structural, none of them a shell recipe.
That ordering is worth noticing. Most custom builders introduce themselves by the wood. This one introduces itself by the geometry where the head meets the shell and by the metal that holds it there — which is a designer’s way round rather than a woodworker’s.
Machined, not cast
Drum lugs are almost always cast: molten metal poured into a mould, cooled, then cleaned up. It is cheap at volume and it is why a lug from one maker looks like a lug from another.
Machined aluminium starts from solid billet and cuts the part out of it. That is slower and more expensive per piece, and it buys two things: tolerances a casting cannot hold, and a part with no porosity or inclusion anywhere in it.
The company’s MAC lugs are that approach applied to the fitting most responsible for how evenly a head can be tensioned. When Larsen restarted production in 2009 the hardware was redesigned and more machined components were added, so the current drums are a later generation of the same idea.
Specified, not stocked
There is no size chart. The company’s instruction is to call and ask about ordering a kit or a snare, which is a small shop being honest about how it works.
The sizes recorded here — 8 by 10, 9 by 12, 11 by 14 and 16 by 22, in Dark Forest Blue with MAC lugs — come from an owner’s account on the company’s own site rather than a catalogue, and the spec table marks them that way. They are a real kit, not the only kit.
Other documented builds run to a 26 by 18 bass drum and a 16 by 16 floor tom, which is a wide spread for a shop of this size.
A company with three lives
The history behind the drums is unusually eventful and the company tells it plainly.
Baltimore Drum, USA ran from 1992 to 2001 and lost its manufacturing facility to a fire in 1998. A new company formed in 2001 with Larsen as founder and designer, and drum production stopped in 2008. In 2009 he restarted it as Baltimore Drum Company, and won the Snare Drum Olympics in Nashville that same year.
The drums are also the house kits at Blues Alley in Washington, The 8x10 in Baltimore and Sheffield Studios in Phoenix, Maryland — which is a different kind of endorsement from an artist roster, and a harder one to arrange.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Bearing edge | Proprietary to Baltimore Drum1 |
| Bearing edge | |
| Snare bed | Proprietary to Baltimore Drum1 |
| Hardware | |
| Lugs | MAC lugs, in machined aluminium1*Baltimore Drum's own site states the company developed machined aluminium hardware; the MAC lug is named on the same page in an owner's account of a Premium Series kit rather than in a spec block. |
| Hardware | Machined aluminium, redesigned when the company restarted in 20091 |
| Build | |
| Configuration | Made to order; a documented Premium Series kit runs 8 × 10, 9 × 12, 11 × 14 and 16 × 22 in1*The sizes come from an owner's account published on Baltimore Drum's own site, not from a catalogue. |
| Origin | |
| Made in | United States1 |
| brand | |
| Company founded | 1986, by Keith Larsen1 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec