Drum Atlas
Menu

Trick · Pro1-V

Trick Pro1-V BigFoot

  • Pedal
  • flagship
  • current

The Trick Pro1-V BigFoot is a 1:1 direct-drive pedal machined from aerospace materials, with an internally housed compression spring and a base plate certified to withstand over 12,000 PSI. Spring tension adjusts with a dial while you are playing.

Updated 2026-09-11Sources

A compression spring, inside the housing

Nearly every pedal in this catalogue uses an extension spring hanging on the outside of the frame, stretched as the footboard goes down and pulling it back up. The Trick uses a compression spring housed inside the mechanism, squeezed rather than stretched.

Ludwig did the same thing on the Speed King in the 1930s, and the Trick arrives at it for the same reason: a compression spring in a housing is constrained on all sides, so it cannot whip, flex sideways or oscillate the way a hanging extension spring does. It cycles faster and returns energy more predictably.

The Speed King’s version of this is also why that pedal squeaks — an enclosed spring is hard to lubricate. Ninety years of manufacturing later, Trick gets the same mechanical advantage without the maintenance problem.

Spring tension while you play

A dial at the top of the housing, turnable mid-performance.

This sounds like a convenience and is closer to a design philosophy. Spring tension is the single most consequential setting on any pedal and the one most dependent on context — the drum, the beater, the tempo, how tired your leg is in the third set.

Every other pedal here makes you stop, find a key or a wingnut, guess, and play again to check. Being able to turn a dial and hear the result immediately is a different way of working.

12,000 PSI

Trick publishes a tensile strength certification for the base plate. No other pedal maker in this catalogue publishes a materials figure of any kind.

Whether a drummer can generate forces approaching that is not the point — they cannot. The number tells you what kind of company this is: one that specifies parts the way an aerospace supplier does, and then prints the specification because it has one.

It is also a fair proxy for rigidity. A base plate that does not flex under load keeps the geometry between hinge, drive and beater constant through the stroke, which is exactly what a direct-drive pedal needs.

The Low Mass option

Seven ounces milled out of the underside of each footboard — close to half the weight of the previous BigFoot board.

Footboard mass matters more on a direct-drive pedal than elsewhere. With no chain to absorb anything, the board’s inertia is directly in series with your foot: a heavy board resists starting and resists stopping, which blunts exactly the immediacy the pedal exists to provide.

Removing mass from the board while keeping it rigid is a machining problem, and it is the sort of problem this company is set up to solve.

Against the Axis

The two machined direct-drive pedals in the catalogue, and they differ more in philosophy than in performance.

Axis exposes geometry as adjustments — the Variable Drive Lever changes leverage, the beater angle is fixed at 21 degrees by design.

Trick exposes everything else — footboard angle, pedal action and throw on a three-position cluster, spring tension on a live dial.

Both are extremely fast, both are unforgiving, and both cost several times what a chain pedal does. Which suits you is a question of whether you want to set a pedal up once or keep tuning it.

Specifications

Specifications
AttributeValue
Pedal
DriveDirect, 1:1 ratio — chainless1
MaterialsTitanium, billet aluminium, stainless and hardened steel1
HousingUS-made machined aluminium3
FootboardLongboard1
Base plateMachined from solid billet aluminium1
Base plate ratingCertified above 12,000 PSI tensile strength1
SpringInternally housed compression spring1
Spring adjustmentDial at the top of the housing, adjustable while playing1
Stroke adjustmentThree-position cluster — footboard angle, pedal action and throw set separately1
Low Mass optionFootboard milled out by 7 oz per board2

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Pro1-V BigFoot Low Mass Direct Drive Single

    Trick Drums U.S.A. · accessed 2026-09-11

  2. 2Tier 2 · Highretailer listing

    Trick Drums P1VBFLM2 Pro1-V Bigfoot Low Mass Double Bass Drum Pedal

    Sweetwater · accessed 2026-09-11

  3. 3Tier 2 · Highretailer listing

    Trick Pro1-V BigFoot Direct Drive Double Bass Drum Pedal

    Guitar Center · accessed 2026-09-11