
DW · MFG Series
DW MDD Machined Direct Drive
The DW MDD is machined from aircraft-grade aluminium in California and carries the floating rotor from the 9000 alongside a solid direct-drive cam. Unusually for a direct-drive pedal, the footboard weighting itself is adjustable.
Adjustable footboard weighting
The unusual specification here, and the one worth understanding.
Footboard mass changes how a pedal feels in a way spring tension cannot replicate. A heavier board carries momentum — once moving it wants to keep moving, which smooths a stroke and adds weight to the feel. A lighter board starts and stops faster, which is quicker and more precise but gives you less to push against.
Trick approaches this by removing seven ounces and leaving it there. DW makes it adjustable, so the same pedal can be set up heavy for a rock gig and light for fast work.
That is a meaningfully different proposition from every other direct-drive pedal in the catalogue, all of which fix their mass at the design stage.
The floating rotor, on a direct drive
DW’s 9000 chain pedal already in the catalogue uses a free-floating rotor, and it reappears here.
The rotor is the part the drive wraps around, and “floating” means it is not rigidly fixed to the axle — it can find its own alignment as the pedal travels, rather than being forced into one path.
On a chain pedal that keeps the chain running true. On a direct drive, where a solid link replaces the chain, it does something more interesting: it removes the binding that a completely rigid linkage would otherwise produce as the geometry changes through the stroke.
This is the compromise that makes an MDD feel less harsh than an Axis. There is still no compliance in the drive, but the mechanism is not fighting itself either.
Fulcrum Geometry and TBT
Two DW terms worth translating.
Fulcrum Geometry is the relationship between the hinge, the drive link and the cam — where the pivot points sit relative to each other, which determines the leverage curve. Making the fulcrum lever adjustable means changing that curve rather than just the tension acting on it.
TBT — Threaded Bearing Technology puts threaded bearings in the linkage and cam rather than plain bushings. The reason is the same one behind Tama’s Oiles bearings on the Iron Cobra: on a pedal with no drive compliance, any play at the pivots is directly transmitted to your foot as vagueness.
Where it sits among the direct drives
Three machined direct-drive pedals, three different arguments:
- Axis A21 — geometry is the adjustment. Fixed 21° beater angle, variable drive lever.
- Trick Pro1-V — everything is adjustable, including spring tension while playing.
- DW MDD — adjustable mass and fulcrum, with a floating rotor softening the rigidity.
The DW is the most conventional-feeling of the three, and the one a player moving from a chain pedal is least likely to find alien. It is also the one that most rewards being set up carefully rather than played out of the box.
Specifications
| Attribute | Value |
|---|---|
| Pedal | |
| Drive | Direct — solid aluminium cam with pivot adjustment2 |
| Material | Aircraft-grade aluminium, machined2 |
| Rotor | Floating rotor technology2 |
| Pedal weighting | Adjustable2 |
| Fulcrum lever | Adjustable2 |
| Linkage | Fulcrum Geometry, with TBT threaded bearings in linkage and cam2 |
| Hinge | Interlocking Delta2 |
| Footboard | Solid aluminium, perforated, contoured heel plate2 |
| Spring adjustment | VERT — vertical sliding2 |
| Hoop clamp | Tri-Pivot swivel toe clamp2 |
| Beater | Control beater with adjustable weight and impact2 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
DW MFG Machined Drive Direct Drive Single Bass Drum Pedal — DWCPMDD
- 2Tier 2 · Highretailer listing
DW DWCPMDD MDD Machined Direct Drive Single Bass Drum Pedal — Polished