
Trick · Dominator
Trick Dominator
The Trick Dominator is the Pro1-V BigFoot concept reduced to essentials: billet-machined, direct drive, with compression spring technology, the P1V6 drive shaft, spring-loaded hoop clamps and a longboard-style footboard. Split cam adjustment separates beater and pedal settings. Built in the USA by the technicians who build the Pro1-V.
Compression springs, not extension springs
Nearly every bass drum pedal returns its beater with an extension spring: a coil that is stretched as the footboard goes down, and pulls back as it rises.
Trick uses compression instead. The spring is squeezed rather than stretched, and it sits inside the pedal’s column rather than hanging on the outside.
Two consequences. A compression spring in a bore cannot twist, buckle sideways or sing the way a loose extension spring does, which removes an entire category of noise and inconsistency. And the spring’s force curve through the stroke is different — it builds as the coil closes, where an extension spring’s builds as it opens — which is part of why a Trick pedal feels unlike a conventional one from the first stroke.
Dual pedal autonomy
On a normal double pedal the two footboards are connected: the slave drives the primary’s beater through a shaft, and the primary’s spring is returning both.
Trick describes its doubles as autonomous — each pedal has its own spring and its own return. So the left pedal’s feel is set independently of the right, and neither is inheriting the other’s tension.
For a player working fast doubles that matters more than almost anything else on the spec sheet. The usual complaint about double pedals is that the slave never feels like the primary; separate springs is the direct answer to it.
What “stripped down” means here
Trick is explicit that the Dominator is the Pro1-V BigFoot concept reduced to its basic elements — and equally explicit about what survives the reduction: compression springs, dual autonomy, the P1V6 drive shaft, spring-loaded hoop clamps, on-the-fly adjustments, and the same technicians in the same Illinois workshop.
What is removed is the Pro1-V’s range of configuration options and the finishing, rather than the mechanism.
The split cam
Beater angle and footboard angle are separate adjustments, made without dismantling anything. It is the same problem Axis solves with its Variable Drive Lever and Yamaha with independent angle controls — on a direct-drive pedal the two are rigidly coupled unless something is designed to uncouple them.
Trick’s implementation is a cam split into two parts that clamp at a chosen relative angle. On-the-fly, in the maker’s phrase, means from the throne.
Trigger-ready
The Dominator supports Trick’s SB1 laser trigger system, which reads the beater optically rather than with a piezo sensor on the drumhead.
That is a metal and hybrid drummer’s feature, and it explains a lot about who these pedals are built for: a player running samples alongside an acoustic bass drum at speeds where a conventional trigger starts to double-count.
Specifications
| Attribute | Value |
|---|---|
| Pedal | |
| Drive | Direct1 |
| Cam | Split cam — separate beater and pedal adjustments1 |
| Spring | Compression spring, with dual pedal autonomy1 |
| Footboard | Longboard style1 |
| Hoop clamp | Spring loaded1 |
| Drive shaft | P1V61 |
| Beater | Custom Dominator1 |
| Build | Billet machined, made in the USA1 |
| Trigger support | Trick SB1 Laser Trigger System1 |
| Shipping weight, double | 6350 g1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec