Tama · Speed Cobra
Tama Speed Cobra 910
The Tama HP910LN is the longboard companion to the Iron Cobra — the same engineering with a much longer, smooth-surfaced footboard. The extra length adds leverage and makes heel-toe and slide techniques far easier, which is the whole reason the line exists.
Longboard against shortboard
The Speed Cobra and the Iron Cobra are the same company’s answer to the same problem with one variable changed, which makes the pair the clearest comparison available on footboard length.
A shortboard — the Iron Cobra — has a separate heel plate hinged to a shorter footboard. Your foot sits mostly in one place and the pedal is played from the ankle.
A longboard — the Speed Cobra — extends the plate almost all the way back to the hinge. The playing surface is much longer, so you can position your foot anywhere along it, and the further forward you sit the more leverage you get.
That matters for two specific techniques:
Heel-toe, where one stroke is played with the ball of the foot and the next with the heel rocking forward, needs a continuous surface long enough for both contact points.
Slide, where the foot starts at the back of the board and slides forward through the stroke, needs the length to slide along.
Neither is possible on a shortboard in the same way. If you do not use either technique, a longboard is simply a bigger pedal.
The smooth surface
Most footboards are textured for grip. This one is deliberately smooth, which is counterintuitive until you know what it is for.
Slide technique requires the foot to move along the board during the stroke. Grip texture fights that — it is exactly the wrong surface for a technique built on controlled sliding.
So the smooth face is not a cost saving. It is a consequence of what the pedal is for, and it is the reason a player who does not slide sometimes finds a Speed Cobra slippery.
Three independent adjustments
Tama separates three things that most pedals couple together, and understanding why is worth more than the feature names.
On a simple pedal, changing the beater angle also changes where the footboard sits, because they are rigidly linked. You end up choosing between the beater angle you want and the footboard height you want.
Here, Vari-Pitch sets beater angle, the Speedo-Ring sets the footboard link angle, and the footboard angle itself is separate. You can have a low footboard and a far-back beater, or any other combination.
The Cobra Coil also moves forward and back along the base plate, which changes the spring’s leverage rather than just its tension — a different adjustment from tightening it.
Which Cobra
Straightforward, for once:
- Heel-toe or slide player → Speed Cobra.
- Everyone else → Iron Cobra, which is the more conventional and more widely liked pedal.
They share the cam options, the bearings and the build. The board is the decision.
Specifications
| Attribute | Value |
|---|---|
| Pedal | |
| Configuration | Single (HP910LN) or twin (HP910LWN)1 |
| Cam | Rolling Glide LiteSprocket — round1Tama: 40% lighter than the previous Iron Cobra cam. |
| Footboard | Longboard — extra long, smooth surfaced1 |
| Spring | Cobra Coil, repositionable forward or back on the base plate1 |
| Spring lock | Swivel Spring Tight — swivels for freer spring movement1 |
| Beater angle | Vari-Pitch — fully independent of footboard angle1 |
| Link angle | Speedo-Ring — adjusts footboard link independently of beater angle1 |
| Beater | Accu-Strike Cobra1 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Highretailer listing