Drum Atlas
Menu

Mapex · 800 Series

Mapex P810 800 Series Pedal

  • Pedal
  • pro
  • current

The Mapex P810 is a double-chain bass drum pedal with an extended footboard, a solid steel base plate with retractable floor spikes and a ball-bearing spring system. It carries the Falcon beater with changeable weights, a self-adjusting hoop clamp with a side-mounted adjuster, and a pedal bag. Double version P810TW.

Updated 2026-09-24Sources

Self-adjusting hoop clamp

Bass drum hoops are not standardised. A thin wooden hoop on a vintage drum, a thick reinforced one on a modern kit, a die-cast hoop, an inlaid one — each presents a different thickness and a different profile to a clamp.

A conventional clamp meets that with two adjustments: how far the jaw opens, and how hard it closes. Get the first wrong and the second does nothing useful.

A self-adjusting clamp takes up the thickness itself, so setting it is one motion regardless of what it is gripping. Mapex puts the adjuster on the side, where a hand reaches it without going under the drum.

The Falcon beater, inherited

The 800 Series sits below Mapex’s flagship Falcon line, and it borrows the Falcon’s beater — including the changeable weights.

That is the most consequential thing you can move down a range. Beater mass sets how much energy reaches the head and how quickly the beater returns; it is the adjustment that changes the drum’s sound most for the least money, and it is usually fixed at this price.

Retractable spikes

Every base plate has to solve two floors. Carpet wants a spike that bites through the pile into the backing; a hardwood or tiled stage wants rubber, because a spike on a hard floor is a skate.

Retractable spikes do both: wound out for carpet, wound in for anything else, with the rubber base doing the work in the second case.

They are also, retracted, the thing that stops a pedal marking a stage — which is not a small consideration in a venue that will ask you back.

Extended footboard

A longer board is more leverage and more room for the foot to move along it, which is what heel-toe and slide techniques need.

It is worth knowing that Mapex offers the opposite in the same catalogue: the Design Lab Swift uses a short board on a belt drive. The two are not better and worse; they are a long-lever approach and a compact one, and which suits you depends on how your ankle works rather than on what you play.

The ball-bearing spring system

The spring’s lower anchor swings through an arc as the pedal moves. On a plain pedal that anchor is a hook or an eye, and the spring drags across it on every stroke — friction, wear, and a faint creak that turns into a squeak by the end of a tour.

Putting a bearing there lets the anchor rotate with the spring’s motion instead of scraping under it. Less friction on the return, and a component that lasts.

Specifications

Specifications
AttributeValue
Pedal
ConfigurationSingle (P810) or double (P810TW)1
DriveDouble chain1
FootboardExtended length1
BeaterFalcon beater with changeable weights1
SpringBall-bearing spring system1
Base plateSolid steel with retractable floor spikes1
Hoop clampSelf adjusting, with an easy-access side-mounted adjuster1
Supplied withPedal bag1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    800 Series Bass Drum Pedals — P810 / P810TW

    Mapex USA · accessed 2026-09-24