
Mapex · Design Lab
Mapex Swift Belt Drive Pedal
The Mapex PDLSW1 Swift is a belt-drive single pedal with a short footboard and a felt beater. Its Quick Set Spring Tensioner adjusts spring tension from the throne in a few twists against a visible tension guide, the beater hub sets independently of the footboard, and a Smart-form case is included.
Adjustments you can reach from the throne
Three features on this pedal say the same thing in different ways: the spring tensioner works from a seated position, the hoop clamp adjusts single-handed from the same place, and the tension guide is positioned to be read rather than felt for.
That is a design brief, not a list. Almost every pedal adjustment in the trade assumes you are kneeling in front of the drum with a key — which means the adjustments get made once, at home, and never again.
Moving them to where the player sits changes what gets used. Spring tension is the setting most worth changing between a fast tune and a slow one, and it is the one nobody changes, because changing it means getting up.
The tension guide
Spring tension has no units. You turn a nut, the feel changes, and if you go too far there is no way back except by feel.
A printed guide beside the adjuster turns that into a number. You can return to a setting, you can note down what a particular room needed, and two pedals of a double can be matched to each other rather than approximately.
It is the kind of feature that reads as trivial and turns out to be the one you use.
Belt drive with a short board
The combination is worth reading, because it is not the usual pairing.
A belt has very little mass, so the drivetrain is quick off the board and there is no chain weight to accelerate. It has a small amount of stretch, which softens the engagement.
A short footboard keeps the pivot close and the movement small — it is the traditional geometry, suited to ankle-driven playing rather than the sliding and heel-toe work long boards exist for.
Together they make a light, immediate pedal built around a compact movement, rather than a long-lever pedal built for maximum speed. Those are different instruments.
The reinforced hinge
Mapex names the footboard hinge as ultra-smooth and silent, with reinforced housings for the axle and bearings, and it is patent pending.
The silent part is not cosmetic. A heel hinge with any play in it knocks — a small click at the top of every stroke that a close microphone hears clearly and that a drummer stops noticing within a week. Housing the bearings properly removes the play, and the noise goes with it.
The case, and the quick spring release
The Quick Hook spring release lets the pedal come apart for travel without taking the beater off, and it goes into the supplied case with its beater still fitted.
Anyone who has unscrewed a beater in a car park to make a pedal fit its bag will recognise the problem being solved. The case has a removable packing pillow to stop the pedal moving inside it and an offset handle so it carries level rather than swinging.
Specifications
| Attribute | Value |
|---|---|
| Pedal | |
| Drive | Belt1 |
| Footboard | Short1 |
| Beater | Felt1 |
| Spring | Quick Set Spring Tensioner, adjustable from a seated position, with a Spring Tension Guide1 |
| Beater hub | Independently adjustable — beater angle sets without changing footboard angle1 |
| Heel hinge | Reinforced bearing hinge with housings for axle and bearings1 |
| Hoop clamp | Easy Reach — single-handed adjustment from the throne, universal design1 |
| Supplied with | Smart-form case with a removable packing pillow and offset handle1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec