
Axis · Wideboard
Axis Wideboard A-CAM
The Axis Wideboard is the newest board in the range: 12.5 inches long, 4 inches wide at the logo and a full 5 inches at the base, which makes it both the largest playing surface Axis offers and a slightly heavier feel. It carries the A-CAM with the patented Variable Drive Lever.
Width is a separate axis from length
Every argument about bass pedal footboards is about length — long boards for sliding and heel-toe, short boards for ankle work. Width barely comes up, because almost every board made is about three and a half inches across.
The Wideboard changes the other dimension. Four inches at the logo and five at the base is a substantially larger surface, and it is wider at the heel end than the toe.
What that gives is lateral freedom. On a narrow board the foot has one line to follow; on a wide one it can sit inboard or outboard, and the ball of the foot can move sideways as well as forward. For a player whose leg does not come straight in at the pedal — which is most players running a double, where the geometry is decided by the hi-hat and the throne — that is a real comfort difference.
The extra weight, named honestly
Axis says plainly that the Wideboard has a slightly heavier feel, and the reason is arithmetic: more aluminium in the board means more mass to accelerate on every stroke.
On a direct-drive pedal the board’s mass is felt directly. Whether that reads as sluggish or as substantial depends on the player. Some want the pedal to disappear under the foot; others want something with weight to push against, which is the same instinct that makes drummers add weight to a beater.
The carbon-fibre Longboard sits at the opposite end of that scale, at half the weight of the aluminium board.
Longboard characteristics on a bigger surface
Axis describes the Wideboard as combining the Longboard’s characteristics with a much larger board, and at 12.5 inches it is actually half an inch longer than the Longboard’s 12.
So it is not a compromise between short and long: it is the long-board geometry, with more material around it. Heel-toe playing at the back of the board and full-leg strokes at the front both work, with more room to do either.
The A-CAM on a large board
The Variable Drive Lever sets footboard angle independently of beater angle, which changes how much board travel produces a full stroke.
On the largest board in the range that adjustment has the most to work with. Board travel and foot position are both variables here, and the VDL is what lets you fix the relationship between them rather than accepting whatever the geometry produces.
Specifications
| Attribute | Value |
|---|---|
| Pedal | |
| Drive | Direct1 |
| Cam | A-CAM, with patented Variable Drive Lever1 |
| Footboard | 12.5 in long, 4 in wide at the logo, 5 in at the base1 |
| Material | Aerospace-grade aluminium, precision machined1 |
| Bearings | Stainless steel at every pivot1 |
| Spring | Standard medium-duty assembly with thumb nuts, or the MicroTune tensioner1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec