Drum Atlas
Menu

Axis · Shortboard

Axis Shortboard A-CAM

  • Pedal
  • flagship
  • current

The Axis Shortboard is the company's traditional-length direct-drive pedal, with a footboard 10 inches long and 3.5 wide and a 1.5-inch heel plate that mounts in two positions. The A-CAM carries Axis's patented Variable Drive Lever, which sets footboard angle independently of beater angle. In the line since 1990.

Updated 2026-09-24Sources

The board Axis is not famous for

Axis built its reputation on the Longboard, and on the players — mostly in metal — who needed a 12-inch board to slide and heel-toe along.

The Shortboard is the same pedal at conventional length: 10 inches, which is close to what a Tama or DW board measures. Axis’s own framing names jazz, rock and hard rock, and heel-down playing specifically.

That last point is the one worth dwelling on. Heel-down technique keeps the foot flat on the board and works from the ankle, and a long board makes that harder rather than easier — the further the toe is from the pivot, the more the ankle has to travel to produce the same beater motion. A short board is the correct geometry for a heel-down player, and it is available here with direct drive, which is a rare combination.

The Variable Drive Lever

Axis’s patented adjustment, and the thing the A-CAM has that the simpler X-CAM does not.

It sets footboard angle independently of beater angle. On any other pedal those are coupled: lift the board and the beater moves back with it.

What decoupling them actually changes is how much board travel it takes to swing the beater through its arc. Steepen the board without moving the beater and you have a longer foot movement for the same stroke — slower, more controlled, more room to shade a note. Flatten it and the same stroke happens in less travel — faster, more immediate.

Axis is explicit that small VDL changes produce noticeable differences, which is worth knowing before you start: this is an adjustment to make in eighths of a turn.

The two heel-plate positions

The heel plate is 1.5 inches long and bolts on in either of two places.

Moving it changes where the hinge sits relative to your heel, which changes the effective length of the board under your foot and the angle at which it starts. It is a coarse companion to the VDL’s fine adjustment, and between them the pedal’s geometry is genuinely configurable rather than merely adjustable.

Machined aluminium, bearings everywhere

Axis pedals are cut from aerospace-grade aluminium rather than cast, and every pivot runs on stainless steel bearings.

On a direct-drive pedal that is not a luxury. With no chain to absorb anything, every bit of friction and every thousandth of play in a pivot reaches the foot. A bushing that a chain pedal would tolerate would be audible here as vagueness.

Stainless rather than plain steel is the detail underneath the detail: a pedal lives in a damp case on a floor, and a rusted bearing is a pedal with a rough spot in its stroke.

Specifications

Specifications
AttributeValue
Pedal
DriveDirect1
CamA-CAM, with patented Variable Drive Lever1
Footboard10 in long, 3.5 in wide at the logo1
Heel plate1.5 in long, with two mounting positions1
MaterialAerospace-grade aluminium, precision machined1
BearingsStainless steel at every pivot1
SpringStandard medium-duty assembly with thumb nuts, or the MicroTune tensioner1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    AXiS Shortboard A-CAM Single Pedal

    Axis Percussion · accessed 2026-09-24