Drum Atlas
Menu

Vic Firth · Soundpower

Vic Firth Soundpower GB1 Large Gong Beater

  • Mallet
  • pro
  • current

The Vic Firth Soundpower GB1 is a gong beater with a 4¼-inch fleece-covered head on a 17¼-inch maple handle — the largest head in the Soundpower gong range. Vic Firth specify it for large gongs, tam-tams and nipple gongs.

Updated 2026-10-12Sources

Why a gong needs its own beater

Because the thing being struck behaves nothing like a drumhead, and the implement has to answer that.

A drumhead is a tensioned membrane. It responds almost immediately and its pitch is set by the tension, so a mallet’s job is to deliver energy and get out of the way.

A gong is a large bronze plate with no definite pitch and an enormous number of modes of vibration. Struck sharply it gives a metallic crash — the high partials all at once, which is what most people picture when a gong is mentioned, and which is rarely what an orchestra wants.

Struck slowly with something soft and heavy, the same plate blooms: the low modes build first, the upper ones follow over several seconds, and the sound swells long after the beater has gone. That bloom is the sound the instrument exists for, and getting it is entirely a question of the implement.

Fleece, and why not felt

Fleece is softer and more compliant than the felt used on bass drum mallets. On a gong that is the right direction: the softer the contact, the more it suppresses the high partials at the moment of impact and the more of the sound arrives as the low modes building.

A felt bass drum mallet on a tam-tam produces an audible thud at the front of the bloom. Fleece does not.

4¼ inches, and the weight behind it

The largest head in the range. A big, soft head spreads the stroke over a wide area of bronze, which excites the plate’s large-scale modes rather than a local region — again pushing the sound low and slow.

17¼ inches of maple gives the leverage to accelerate it. Maple rather than hickory keeps the weight down, which matters on a beater this size held at arm’s length.

Nipple gongs, which are a different instrument

Vic Firth list three applications and the third is worth separating. A nipple gong (or bao gong) has a raised boss at its centre and, unlike a tam-tam, a definite pitch.

A pitched gong wants the same thing a timpano wants: a soft, broad contact that lets the fundamental develop rather than scattering energy into the upper partials. A large fleece head does that, which is why one beater covers all three.

Where it is the wrong beater

A passage needing a sharp, immediate crash, or rhythmic gong writing. There is nothing here to articulate with — which is what the smaller and harder beaters in the range are for.

Specifications

Specifications
AttributeValue
stick
ModelGB11
TypeGong beater1
Length17.25 in1
Head size4.25 in1
Head materialFleece, white1
CoreFelt1
HardnessSoft1
HandleMaple1
Intended useConcert,Marching1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    GB1 — Soundpower Large Gong Beater Mallet

    Vic Firth · accessed 2026-10-12