Vic Firth · American Custom Keyboard
Vic Firth American Custom M6 Keyboard Mallet
The Vic Firth M6 is a keyboard mallet with a hard 1-inch black phenolic ball on a 16-inch birch handle. Vic Firth specify it for all-around playing on orchestra bells and xylophone.
The other half of the range
Vic Firth’s American Custom keyboard mallets divide into the soft ones — yarn, rubber, poly — and the hard ones, and the division is not about volume. It is about which instrument the mallet is for.
A tuned bar struck by anything produces its fundamental plus a spray of upper partials that are not harmonically related to it. Soft heads suppress the partials; hard heads let them through.
On a marimba the partials are unwanted: the instrument’s rosewood bars are tuned so the fundamental carries the music, and a hard mallet produces a clatter on top of it.
On a xylophone or a glockenspiel the partials are the sound. Those instruments are played for their brightness and their ability to cut, and that brightness is exactly the upper register a soft mallet removes. Playing a xylophone with a yarn mallet produces something muffled and apologetic.
So phenolic is not an aggressive choice here. It is the correct one.
Phenolic, specifically
Phenolic is a thermoset resin — a hard, dense, dimensionally stable plastic. It barely deforms on impact, so the contact is very brief and almost nothing is absorbed.
Against the alternatives at the hard end: brass (the M11) is harder and heavier still, bright to the point of being a special effect. Acrylic and Lexan are firm but slightly more forgiving. Phenolic sits at the top of the practical range — the hardest material a player uses as a default rather than for a specific colour.
Why 1 inch is the all-rounder
Ball diameter on a hard mallet changes mass more than contact patch, because a non-compressing head barely spreads whatever its size.
At 1 inch the mallet has enough mass to make a glockenspiel’s small steel bars ring properly and little enough that a xylophone’s top octave does not sound struck. The M7 at 1¼ inches is the same material built for aggression; this is the pair for a normal orchestral part.
What it asks
Accuracy, and some care. A hard ball on a hard bar is unforgiving of a mis-struck note — there is nothing to absorb a glancing blow — and phenolic will mark a rosewood marimba bar, which is the practical reason not to use these on one.
Birch at 16 inches
The range standard: light, with some flex to take the edge off a hard contact, and consistent between pairs.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
M6 — American Custom Keyboard — Hard, Black Phenolic, 1" Mallets