Drum Atlas
Menu

Vic Firth · American Custom Keyboard

Vic Firth American Custom M11 Keyboard Mallet

  • Mallet
  • pro
  • current

The Vic Firth M11 is a keyboard mallet with a brass head on a 16-inch birch handle — the hardest and heaviest in the American Custom keyboard range. Vic Firth specify it for orchestra bells and bell tree.

Updated 2026-10-12Sources

Metal on metal

The far end of the range, and the only mallet in it with a brass head. Vic Firth name two applications and no others, which is unusually narrow for a catalogue entry and entirely accurate.

Brass does not deform at all on impact. The contact is as brief as a contact can be, so nothing is absorbed and every upper partial the bar can produce survives. The result is the brightest, most piercing sound any keyboard implement makes.

Orchestra bells

A glockenspiel is a set of small, thick steel bars, and it is the one tuned instrument whose character is almost entirely upper partials. Its fundamental is weak; what carries is a bright, bell-like shimmer well above the written pitch.

Brass maximises exactly that. A glockenspiel part written to cut across a full orchestra — which is most of them, since the instrument is usually scored at climaxes doubling a melody — gets what it needs from a brass mallet and only an approximation of it from phenolic.

The weight matters too. Brass is several times denser than phenolic, so each stroke carries far more energy, and steel bars need real energy before they ring properly.

Bell tree

The second application is a different instrument altogether: a vertical stack of small tuned bells or cup-shaped discs, played with a glissando — the mallet drawn up or down the stack in one motion rather than striking individual notes.

Brass is right because the implement is sliding across metal, repeatedly, under pressure. A wound head would snag and wear through; phenolic would wear and go dull. Brass slides, and outlasts the player.

What it will damage

Worth stating plainly. Brass on a rosewood marimba bar will dent it, and on a vibraphone’s aluminium bars it will mark them. Neither is a reason to avoid the mallet; both are reasons to keep it out of the general stick bag.

Where it sits

Vic Firth’s hardness ladder ends here: extra soft yarn, soft, medium, medium hard, cord, phenolic at 1 and 1¼ inches, then brass. Each rung changes which instrument the mallet is for rather than how loud it is, and this rung is for steel.

Birch at 16 inches

The range standard. On a brass-headed mallet the handle’s slight flex is doing real work, because it is the only compliance anywhere in the implement.

Specifications

Specifications
AttributeValue
stick
ModelM111
TypeKeyboard mallet1
Length16 in1
Head materialBrass, brass1
HardnessExtra hard1
HandleBirch1
Intended useConcert1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    M11 — American Custom Keyboard — Extra Hard, Brass Mallets

    Vic Firth · accessed 2026-10-12