Mike Balter · Balter Basics
Mike Balter Balter Basics BBB4 Keyboard Mallet
The BBB4 is the hard cord model of Balter Basics, the student and school end of the Mike Balter keyboard range. Twelve models: three hardnesses each in yarn, cord and rubber, plus PVC, poly and brass. Made at the Vic Firth factory in Newport, Maine since Zildjian acquired the brand.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| stick | |
| Model | BBB41 |
| Type | Keyboard mallet1 |
| Intended use | Marimba, xylophone and glockenspiel1 |
| Hardness | Hard1Balter grade the Basics line in three steps — soft, medium, hard — repeated across each head material, so the colour tells you the grade: red soft, blue medium, yellow hard. |
| Head material | Cord, yellow1†Also reported as Yarn, yellow — ThomannVic Firth name this model a cord mallet; Thomann's listing for the same model calls the head yarn. Both agree on the colour and the hard grade. Not resolved here. |
| Head size | 1.374 in2Thomann list 34.9 mm. Vic Firth do not publish a head diameter for this model. |
| Length | 15.4 in2Thomann list 39 cm. Vic Firth do not publish a length. |
| Handle | Birch2From the dealer listing; Vic Firth do not state a handle material for the Basics line. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
- †Sources disagree on this value; both readings are given.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Highretailer listing