Mike Balter · Balter Basics
Mike Balter Balter Basics BBB1 Keyboard Mallet
The BBB1 is the hard yarn model of Balter Basics, the student and school end of the Mike Balter keyboard range. Twelve models: three hardnesses each in yarn, cord and rubber, plus PVC, poly and brass. Made at the Vic Firth factory in Newport, Maine since Zildjian acquired the brand.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| stick | |
| Model | BBB11 |
| Type | Keyboard mallet1 |
| Intended use | Marimba, xylophone and glockenspiel1 |
| Hardness | Hard1Balter grade the Basics line in three steps — soft, medium, hard — repeated across each head material, so the colour tells you the grade: red soft, blue medium, yellow hard. |
| Head material | Yarn, yellow1 |
| Head size | 1.25 in2Thomann list 31.75 mm. Vic Firth do not publish a head diameter for this model. |
| Length | 16.5 in2Thomann list 41.9 cm. Vic Firth do not publish a length. |
| Handle | Birch2From the dealer listing; Vic Firth do not state a handle material for the Basics line. |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Highretailer listing