Drum Atlas
Menu

Tama · 1st Chair

Tama HT850BC 1st Chair Round Rider XL HYDRAULIX

  • Hardware
  • flagship
  • current

The Tama HT850BC is a gas-lift drum throne with an extra-large round cloth seat — the classic Round Rider shape made wider and thicker. Height changes by lever between 515 and 695 mm, the seat detaches from the base for transport, and the whole throne weighs 6.0 kg.

Updated 2026-09-24Sources

A gas lift that comes apart

Two things about the HYDRAULIX base, and the second is the one nobody mentions.

The first is speed: pull the lever and the seat rises or sinks with your weight. Height is found by sitting rather than by measuring, which is the whole argument for a gas cylinder and the reason office chairs settled on it.

The second is that the seat lifts off the base entirely. A throne is one of the most awkward shapes in a hardware bag — a wide disc on a splayed tripod, which nests with nothing. Split into a seat and a base, it packs like two flat objects. On a night when everything goes in one car, that matters as much as the lever does.

XL, and what extra area buys

The Round Rider shape is the traditional one: gently domed, symmetrical, no wrong way round. The XL takes that outline and makes it both wider and thicker.

Wider spreads your weight over more area, which lowers the pressure at every point of contact — that is the number that decides whether your legs go numb in the third hour, not the softness of the foam. Thicker gives the foam more travel before you are resting on the base plate underneath.

The cost is a bigger object to swing a leg over and to pack, and a seat that locates you less: on a large top there is more room to drift out of position without noticing.

Cloth that wicks

Tama specifies a fabric chosen to move perspiration away and to stop the player sliding, which is the practical case for cloth over vinyl on a hot stage.

It is a small thing that shows up as a large one: a player who is subtly gripping the seat to stay put is spending energy on that instead of on the kit, and doing it without ever deciding to.

Where it sits in the line

Tama’s throne range is a grid — seat shape across, base type down. Round Rider, Round Rider XL, Glide Rider and Ergo-Rider are the shapes; tripod and HYDRAULIX are the bases; cloth and vinyl are the coverings.

This is the largest round seat on the gas base. If you know you want a round top and you want to change height by lever, this is the corner of the grid you are in.

Specifications

Specifications
AttributeValue
Hardware
TypeDrum throne1
SeatRound Rider XL, cloth top — wider and thicker than the standard Round Rider1
Height range515–695 mm1
Weight6 kg1
Height adjustmentHYDRAULIX gas lift, lever operated1
Seat lockTwo-piece locking hinge collar with oversized wing nut1
TransportSeat removable from the base1
FabricWicks perspiration and resists slipping1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    1st Chair Round Rider XL HYDRAULIX "Cloth Top" HT850BC

    Tama · accessed 2026-09-24