Drum Atlas
Menu

Tama · 1st Chair

Tama HT230 1st Chair Rounded Seat

  • Hardware
  • intermediate
  • current

The Tama HT230 is a drum throne with a traditional round seat on the 1st Chair height adjustment, which combines a threaded rod with a T-bolt so the height is set quickly and then dialled exactly. It weighs 4.0 kg and adjusts between 460 and 660 mm — 18 to 26 inches.

Updated 2026-09-24Sources

Threaded rod and T-bolt, working together

Drum thrones have historically picked one of two height mechanisms and lived with its shortcomings.

A threaded rod gives an exact, repeatable height that cannot slip, because the seat’s weight rests on the thread. Getting to a new height means spinning the seat a long way.

A T-bolt clamp slides the post to any height in a second, and relies on friction to keep it there.

The 1st Chair system uses both on the same post. You loosen the bolt and slide the rod to roughly the right place — Tama’s own instruction is that exactness does not matter at this stage — then run the height lock down to the nylon bushing and fine-tune on the thread.

The result is a coarse adjustment that takes a moment and a fine adjustment that is a thread, with the load carried on the thread rather than the clamp once it is set. It is the sensible answer and it is on every throne Tama makes.

The round seat, and its case

Round tops are the default shape for a reason: they are symmetrical, so there is no wrong way to sit on one and no penalty for turning. A player who works a wide kit, reaches behind themselves for a percussion table, or gets up mid-set is best served by a seat with no front.

Saddle and cutaway designs like Tama’s own Ergo-Rider buy thigh clearance by committing you to one facing. That is worth having if your legs are doing continuous double-bass work; it is a cost if they are not.

Eight point eight pounds

Four kilos is light for a throne, and the number is worth reading against the rest of the range: the Glide Rider is 5.9 kg, the Ergo-Rider Quartet with its backrest 9.4.

Weight in a throne is stability, and stability matters in proportion to how hard you drive the bass drum. The HT230’s mass suits a player who is carrying their own hardware and sitting rather than fighting the kit; the heavier models in the line spend their extra kilos on staying put.

An 18-inch bottom end

Eighteen inches is genuinely low for a throne’s minimum, and it is the number that makes this model work for shorter players and for anyone who likes their thighs sloping down toward the pedals.

Set the throne first, before anything else on the kit. Every other height on a drum set — snare, hi-hat, ride — is measured from where your body ends up.

Specifications

Specifications
AttributeValue
Hardware
TypeDrum throne1
SeatTraditional round1
Height range460–660 mm1
Weight4 kg1
Height adjustment1st Chair — threaded rod with T-bolt1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    1st Chair Rounded Seat HT230

    Tama · accessed 2026-09-24