Drum Atlas
Menu

Pearl · Icon

Pearl Icon 3-Sided Drum Rack

  • Hardware
  • flagship
  • current

The Pearl DR-503C is a three-sided drum rack on curved aluminium support rails that wrap the kit around the player. The rails adjust for bass drum clearance, and tom arms and cymbal booms adjust independently within each clamp. The system ships with four PCX-100 pipe clamps and two PCL-100 pivot mounts.

Updated 2026-09-24Sources

Three sides

A single front bar carries the toms. A three-sided rack adds a wing on each side, and that changes what a rack is for.

The front bar alone is a tom mount. Add the sides and the rack is carrying the cymbals too — which means the tripods go away entirely and the only things standing on the floor are the rack’s own legs, the bass drum and the throne.

For a large kit that is the whole argument. Five cymbal stands interleaved with a snare stand and a hi-hat is a thicket; six rack feet is not.

Curved rails

The rails bend toward the player rather than running straight across.

Two things follow. A curve brings the mounting points closer without bringing the structure closer — the rail arrives near your hands while its supports stay out at the edges of the kit. And a curved rail puts drums and cymbals on an arc centred roughly on the player, which is the shape a drummer’s reach actually describes.

A straight bar puts everything on a line, and the ends of that line are further away than the middle.

Aluminium rails on steel legs

The materials are split by job, and it is a sensible split.

The rails are the long parts, so their weight dominates what the rack costs to carry, and they are loaded mostly in bending along their length — a condition where a large-diameter aluminium tube performs well for its mass.

The legs and clamps are steel. Legs take concentrated loads at their joints, and clamps need threads that survive being done up hard several hundred times; both favour the stiffer, tougher material even at the weight penalty.

Adjustable clearance, and why it matters

A rack’s front rail has to pass in front of the bass drum, and bass drums are not one size. A 26-inch drum’s hoop stands where a rail sized for a 20 would be.

Pearl’s rails adjust for that, and tom arms and cymbal booms then adjust independently within their clamps — so the rail can be moved to clear the drum without every mounting point having to be re-found.

The clamps in the box

Four PCX-100 pipe clamps and two PCL-100 pivot mounts.

That is the specification to check before pricing any rack, because a bare frame with nothing to hang on it is a substantial second purchase. Six mounting points is a four-piece kit with a couple of cymbals; a larger setup adds clamps from the same range.

Specifications

Specifications
AttributeValue
Hardware
TypeDrum rack — three sided1*Pearl's own site does not serve this project; the specification is Sweetwater's listing.
Support railsCurved aluminium, slip proof1*Retailer listing.
Legs and clampsSteel1*Retailer listing.
Supplied clampsFour PCX-100 pipe clamps and two PCL-100 pivot mounts1*Retailer listing.
Rail adjustmentRails adjust for bass drum clearance; arms and booms adjust independently within each clamp1*Retailer listing.
FeetNon-skid rubber1*Retailer listing.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 2 · Highretailer listing

    Pearl DR-503C Icon 3-sided Drum Rack, Chrome

    Sweetwater · accessed 2026-09-24