
DW · Accessories
DW SM110 Control Beater
The DW Control beater is a bass drum beater with three striking surfaces — hard flat felt, spherical felt and flat plastic — and four removable 10-gram brass weights giving five increments of forward throw. A self-levelling head keeps it striking flat. It weighs 104 grams loaded and 64 grams empty.
Beater mass is a tuning control
A beater is the last link in the chain between foot and drum, and the cheapest thing on the kit to change. It is also the one most players never touch.
Mass is the variable. A heavy beater carries more momentum into the head, which produces a fuller, lower note and a slower return; a light one arrives with less energy and comes back faster, which is what a player working fast doubles wants. Nothing else about the pedal changes and the drum sounds different.
The Control makes that adjustable rather than fixed. Four brass slugs at 10 grams each move the beater between 64 and 104 grams — a range of over half again on the empty weight — and because the weights sit ahead of the shaft rather than on it, each one also shifts the throw forward by one increment.
Three surfaces on one head
- Hard flat felt — the largest contact patch. Most of the beater meets the head at once, which spreads the impulse and gives a round, full note with the attack contained.
- Spherical felt — the same felt shaped into a dome, so contact happens over a small area. Same energy through less surface means more attack and a tighter note.
- Flat plastic — hard, bright and the most articulate, which is what a player cutting through a loud stage or feeding a trigger usually wants.
Rotating the head rather than swapping beaters means the change takes seconds and the weight setting survives it.
The self-levelling head
A beater is set at one angle, and the head it meets is not always at that angle: hoop clamp height, pedal position and beater length all move the geometry, and a beater that arrives edge-first wears a stripe into the head and loses energy into the glancing contact.
A self-levelling head pivots to meet the surface flat regardless of where the arc puts it. The head wears evenly, and the note is the one the surface is meant to produce rather than a partial version of it.
Designed alongside the MDD
DW developed this beater with its Machine Direct Drive pedal, which is a clue to who it is for. A direct-drive pedal transmits everything, so every gram at the beater is felt at the foot — and a pedal with that much resolution is exactly where a beater you can weigh in 10-gram steps starts to be worth having.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec